iScooter iX4 Instruction Manual page 8

Display Content
1. Open the electric lock
5. Press Horn button and the
display reads "P10" (non-zero
start); press S button and the
display reads "P11"(zero-start);
press M button to return to P10
Note: After mode is set,
wait about 5 seconds
and the mode setting will
be saved automatically
and it will exit the interface.
2. Press the power button
to turn on the scooter
4. Press and hold Power
and horn buttons for 5-8
seconds to enter mode
setting interface
7. Press Horn button and the
display reads P30(low-speed
mode); press S to switch to
P31(high speed mode);
press M to return to P30
3. 3 speed levels:
10 km/h, 15 km/h, 25 km/h
6. Press Horn button and the
display reads P20 (cruise
control off); press S to turn on
cruise control; press M to
return to P20
8. Press the power button to
save the settings to high
speed mode: 15 km/h, 30
km/h, 45 km/h
06