Mx840B Pin Assignment - HBM QuantumX Operating Manual

Modules and transducers
Transducer type
Incremental encoder
SSI protocol
Torque/speed (HBM torque trans­
ducer)
Frequency measurement, pulse
counting
CAN bus
8.2.1

MX840B pin assignment

So that insertion or removal of a transducer connection can be unmistakably
identified and, with TEDS, the channel is automatically parameterized, Pin 4
and Pin 9 in the connector plug must be bridged! If this bridge is missing, no
measurement values will be recorded at the connection!
Fig. 8.2 Pin arrangement of connector plug, view from the solder side
82
Bridge
1
4
5
A03031_24_E00_01 HBM: public
Connection sockets
5 ... 8
5 ... 8
5 ... 8
5 ... 8
1
11
15
See page
from 141
148
142, 151
from 141
154
QuantumX