Victory 4x4 5TH GEN 4RUNNER Install Instructions

Door molle panel

5TH GE N 4RU NN ER & G X46 0

D OOR MO LL E PAN EL

INS TAL L I NSTRUC T ION S

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don't hesitate to call us at 269-459-8447!

Table of Contents

Need help?

Do you have a question about the 5TH GEN 4RUNNER and is the answer not in the manual?

Page 1 Be sure to check out the install video on the product page, if available. Thank you for purchasing from Victory 4x4! Checkout our website, victory4x4.com for other great off-road products. Be sure to rate and review our product online. If you have any questions or are missing parts, please...
Page 2 I NCLU D E D HARDWARE Black Philips Head Black Nylon 1/2” OD 18-8 Stainless Steel 3/8” Long Spacer 3/4” Long Screw...
Page 3 I NCLU D E D PARTS...
Page 4 I NS TA LL ATI ON Start by lining up the panel up on you door in the area between the cubby and the arm rest, as shown below (driver side). When the panel is lined up to your liking, then take a punch or a philips head screw driver and apply pressure to mark the four smaller mounting holes in the plastic.
Page 5 INSTA L L AT I ON Once the pilot holes are marked, you can remove the panel. Take the provided screws and start to thread them in to the locations just marked. Make sure not to punch too far through the plastic. You can also use a drill with a 1/16”...

Gx460