Technical Data - Bosch C3 Operating Instructions Manual

English | 8
3 Control Panel / List of Parts
1. Charger
2. Mounting hook
3. AC Power cord (to connect to 120V outlet)
4. Charging cable with cable lug (red and black)
4a. Cable fuse
5. DC clip for (+) Terminal (red)
6. DC clip for (–) Terminal (black)
7. Standby / power indicator
- Blue LED ring indicates standby
8. Mode selection button
- Charger has to be connected to the battery
9. Reverse polarity protection indicator
- Red LED indicates reverse hook up
10. Charging indicator
- Flashing LED indicates charging in process

4 Technical Data

Primary Input voltage AC:
Current:
Secondary Rated output voltage: 6.3 V
Charging voltage:
Charging current:
Degree of protection:
Battery type:
Battery capacity:
Fuse (internal):
Ambient temperature:
Dimensions:
Automotive Aftermarket
11. Charge status indicator
12. Mode 1
13. Mode 2
14. Mode 3
15. Mode 4
16. 12V operation indicator
120V / 60 Hz
1.2 A(rms) / 60 W
12.6 V
14.7 V (± 0.25 V),
14.4 V (± 0.25 V),
7.2 V (± 0.25 V)
3.5 A (± 10 %),
0.8 A (± 10 %)
IP 65 (dustproof, splash water proof)
6 V / 12 V lead acid battery (AGM, WET, GEL, open and VRLA)
6 V:1.2 Ah–14Ah / 12 V:1.2 Ah–120 Ah
1.6 A
0 °C to + 40 °C / 32 °F to 104 °F
185 x 81 x 55 mm / 7
- Illuminated LED indicates fully charged battery
and charger is operating in the trickle charging
mode
– 6V output (for batteries in garden
6V
tools, motorcycles, classic cars, etc.)
– 12V output (for motorcycle
batteries)
– 12V output (for car or marine
batteries)
– 12V output (for batteries at
temperatures <41⁰°F or for AGM batteries)
/ " x 3 / " x 2 / " (L x W x H)
1 1 1
4 4 8
Battery Charger | C3 | June 2010