Table of Contents
Advertisement
78K0R - Cool it!
After the demo workspace has been opened the files contained in the workspace are displayed. Now click
on the little "+" sign next to the project filename "ADC_demo - Debug" to show all files that were part of the
selected demonstration project. The screen should now look similar to this:
As a next step check some settings of the IAR Embedded Workbench that have to be made for correct
operation and usage of the On-Board debug function of the 78K0R – Cool it! board. First highlight the upper
project folder called "ADC_demo – Debug" in the workspace window. Then select "Project" > "Options" from
the pull-down menus. Next select the category "Debugger". Make sure that the driver is set to "TK-78" in
order to use the On-Board debug function of the 78K0R – Cool it! board. The device description file must be
set to "io78f1166_a0.ddf". The corresponding COM port where the 78K0R – Cool it! board is connected to
the host PC will be detected automatically by the IAR C-SPY debugger.
Figure 24: IAR project workspace
Figure 25: IAR debugger options
User's Manual U18426EE1V0UM00
Select "TK-78" to
use On-Board
debugging.
Check that device
description file of
µPD78F1166 is
selected.
39
Advertisement
Table of Contents
