Data Transfer - Leica SL2-S Instruction Manual

GEOTAGGING STATUS
The status of existing location information is displayed on screen,
provided the info bars are displayed and geotagging is enabled. The
status screen will always show the current geotagging status. The
geotagging status will also be shown in the top display.
The location information is current
(most recent geolocation max. 15 mins prior).
The location information is not necessarily current any-
more (most recent geolocation max. 12 h prior).
The available location information is outdated
(most recent geolocation more than 12 h in the past).
No location data will be written to Exif data.
No icon Geotagging is deactivated.
Location information will be continuously updated as long as the
camera is connected to Leica FOTOS. The Bluetooth function of the
camera and the mobile device must therefore remain enabled to
ensure latest information. It is, however, not necessary for the app
to be running in the foreground.
100
PHOTO SETTINGS ▸ DATA MANAGEMENT

DATA TRANSFER

Data can be conveniently transferred to mobile devices via Leica
FOTOS. Alternatively, a card reader or USB cable can be used for the
transfer.
ABOUT LEICA FOTOS
▸ See chapter "Leica FOTOS" (p. 264)
VIA USB CABLE
The camera supports multiple data transfer options (PTP and mass
storage mode). A transfer mode can be permanently selected or
chosen every time a connection is established.
Factory setting:
PTP
▸ Select in the main menu
Camera Settings
▸ Select
USB-Mode
▸ Select the desired setting
( , ,
Mass Storage PTP Select on connection
Notes
• We recommend using a card reader for the transfer of large files.
• The USB connection must not be interrupted while data is being
transferred, as the computer or the camera could otherwise
"crash" and irreparable damage could occur on the memory card.
• The camera must not be turned off or automatically shut itself
down due to a lack of battery power while data is being trans-
ferred, as this can cause the computer to crash. For the same
reason, the battery must never be removed from the camera while
the connection is active.
)