Preparations; Fuel; Oil - GENMAX GM7250iEDC User Manual

Inverter generator
Table of Contents

Advertisement

1

Fuel

DANGER
• Fuel is flammable and toxic, please read the Safety Instruction carefully before refueling;
• Do not fuel too full, otherwise fuel will spill after fuel tank is warmed;
• After refueling, confirm that the fuel tank cap has been tightened.
ATTENTION
• After refueling, dry gasoline residue with a clean and soft cloth in time to avoid damaging plastic
enclosure;
• Unleaded gasoline must be used, as leaded gasoline can seriously damage internal parts of the
generator;
Remove fuel tank cap, and add gasoline to red horizontal indicating line oil
level.
Fuel tank capacity: 3.6gal
2

Oil

No oil is filled into this generator when being delivered. Do not start up the generator without filling sufficient
oil.
1.
Please place the generator onto a horizontal plane surface;
2.
Loosen the two bolts on the right panel cover
and remove the left panel cover. Unscrew oil
dipstick;
3.
Fill in 0.21gal oil (SAE 10W/30 oil is
recommended, of which the grade is API
standard Type SE or higher);
4.
Oil to the appropriate position, tighten the dipstick, cover the right exterior cover, and tighten the bolts.

PREPARATIONS

Don't go over the scale
11

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GM7250iEDC and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF