NorthStar M157119G Owner's Manual page 26

2. Drain pump oil into suitable container and dispose
of responsibly.
3. Reinstall oil drain plug.
4. Make sure unit is sitting level.
5. Reference the "Specifications" section of this
manual to determine the oil type and quantity
needed for your pump model.
6. Replace oil fill cap.
Fig.06738
NOTICE:
Dispose of used motor and pump oil in a manner that is
compatible with the environment and in accordance
with local, state, and federal laws and regulations.
• Take used oil in a sealed container to your local
recycling center or service station for reclamation.
• Do not throw it in the trash, pour it on the ground, or
pour it down a drain.
NOTE TO COMMERCIAL USERS:
All mechanical equipment, no matter how well designed,
will need maintenance and repairs. A NorthStar
pressure washer is no exception. At times, a NorthStar
pressure washer may become inoperable because
repairs are required. NorthStar Product Support will
assist in these repairs as needed, but if an inoperable
pressure washer creates a major expense to your
business, then we strongly recommend the following:
Have a staff person become familiar with the
•
mechanical operation of the pressure washer and
capable of making minor repairs and performing all
preventative maintenance procedures.
Keep a stock of recommended service parts for
•
maintenance and minor repairs.
Maintenance & Repair
Contact NorthStar Product Support at
questions, problems, or parts orders.
26
IMPORTANT: Replacement Parts
If a part needs replacement, only use parts that
meet the manufacturer's part number
specifications. Replacement parts that do not
meet specifications may result in a safety
hazard or poor operation of the pressure
washer
.
1-800-270-0810 for any