Channel Menu; Memorizing Channels - Samsung 4 Series User Manual

Channel Menu

defaults.

❑ Memorizing Channels

If you are not using a cable box or satellite box, when you first set up
your TV using Plug & Play, the TV memorized the channels that were
available over the air or through your cable system and added them to
the Channel List. The Antenna and Auto program functions described
below let you re-run the channel memorization function without having to
re-run the Plug & Play procedure.
Antenna (Switch to Cable / Switch to Air t)
Before your television can memorize the available channels, you must
select your TV's signal source, Air (using an antenna) or Cable. Select
Menu > Channel > Antenna > Air or Cable. After you have selected the
signal source, go on to the Auto Program function.
✎
Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example, if you
receive your TV signal over the air, and you select Cable, you will
see only snow. You must select Air to see a picture.
Auto Program
The Auto Program function memorizes all channels that are available
over the air or through your cable system and adds them to the Channel
List.
✎
If your TV is connected to a cable box or satellite box, you do not
need to run Auto Program. You will use the tuner in the box, not the
tuner in the TV, to select channels.
To start Auto Program, follow these steps:
1. Push MENUm → Channel → Auto Program → ENTERE on your
remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV signal.
Air
If your TV is connected to an antenna choose Air, and then press
ENTERE. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose Cable, and then
press ENTERE. Go to Step 3.
Auto
If you choose Auto, and then press ENTERE, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select the
type of digital and analog cable systems you have: STD, HRC, or
IRC. Most systems are STD (Standard). When done, select Start,
and then press ENTERE. The TV will start memorizing channels.
✎
Channel memorization can take up to 45 minutes, depending on
your cable system.
✎
Memorized channels are added to the Added Channels list. These
are the channels you will see when you use the Channel buttons on
your remote.
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take 20~30 minutes.
✎
Press the ENTERE button to stop Clear Scrambled Channel.
✎
This function is only available in Cable mode.
❑ Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels you've
scheduled for viewing. Add or delete Favorite channels, add or delete
channels from the Added Channels list, schedule channels or programs
for viewing. Select a channel to watch on the All Channels, Added
Channels, or Favorite screen by pressing the ▲/▼ buttons, and then
pressing the ENTERE button.
✎
If you use a cable box or satellite box, you cannot use the Channel
List functions.
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air ' Zoom ' Select T Tools ► Next Program
Channel List Screens icons are listed on the left side. Select an
icon using the ▲/▼ buttons to view each list.
All Channels: Shows all currently available channels including
■
those you deleted from the Added Channels list.
Added Channels: Shows all Added Channels. These are the
■
channels that appear when you press the
* Favorite: Shows all favorite channels.
■
Programmed: Shows all channels and programs currently
■
scheduled using Timer Viewing.
✎
Remote control buttons active on the Channel List screen.
x
Green (Zoom): Enlarges or shrinks a channel number.
x
Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A c mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
x
T (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
x
► (Next Program): Displays next programs.
Display Icons Used in the Channel List Screens
Icons
A selected channel.
c
A Favorite channel.
*
A reserved program.
)
A program currently being broadcast.
(
❑ The Channel List Tools Menu
O
Channel List → t
The Channel List Tools menu contains most of the functions you can use
on the All Channel, Added Channels, and Favorite List screens. To
view, select a list screen, select a channel, and then press the
button.
■ Add / Delete: Delete a channel from or add a channel to the Added
Channels list.
To delete channels from the Added Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using the
▲/▼ buttons and the Yellow (Select) button on your remote.
2. Press the TOOLS button on your remote. The Tools menu appears.
3. Select Delete in the Tools menu, and then press the ENTERE
button.
button.
CH
Meaning
TOOLS