AQL KOSMOS2 - Wireless Headphones Manual

Description

1. Multifunction button
2. Volume + button
3. Volume - button
4. FF button
5. Rew button
6. LED
7. Aux port
8. MicroUSB port
9. Microphone
10. USB-micro/USB charging cable
11. cable with double 3.5 mm jack

PRELIMINARY OPERATIONS

Charge the device before use. Use the Micro-USB cable (10) supplied.

The LED lights up red when the unit is charging. The LED lights up blue when charging is complete.

Headphones pairing

1. Make sure that the device is switched off and turn off Bluetooth^® on the phone.
2. Press and hold down the MF button (1) for approx. 8 seconds until the LED (6) flashes red/blue in alternating fashion.
3. Turn on Bluetooth^® on the phone and select KOSMOS2 after it has been detected. The LED (6) on the device will now flash blue to show that the unit has been paired.

If pairing is unsuccessful, turn the device off and try again.

If the device or the phone has been turned off or is out of range, you may need to use the menu on your phone to pair them again; or, just press the MF button (1) once.

Pairing the headphones to a second phone (multipoint operation)

• Turn Bluetooth^® off on the first phone
• To connect to the second phone, see the instructions in the section, "Pairing the headphones"
• Once the connection has been established with the second phone, turn on Bluetooth^® on the first phone and select KOSMOS2 if it does not connect automatically.

USE

To turn the headphones ON: hold down the MF button (1) until the blue LED (6) turns on (approx. 5 seconds).

To turn the headphones OFF: hold down the MF button (1) until the LED (6) flashes red (approx. 5 seconds).

Play/Pause: press the multifunction button (1)

Rew: press and hold down the -/Rew button (5)

FF: press and hold the +/FF button (4)

To adjust the volume: press the Volume + or Volume - buttons (2 or 3) briefly.

To answer a call: press the MF button (1) briefly.

To end a call: press the MF button (1) briefly.

Battery discharged indicator: if the LED (6) flashes red and you hear a tone every 2 minutes, the battery is low.

TECHNICAL SPECIFICATIONS

Bluetooth^®: v5

Bluetooth^® frequency range: 2.4GHz~2.48GHz

Supported profiles: Headset – Handsfree – A2DP - AVRCP

Range: 10m

Micro-USB port voltage (V): 5V

Micro-USB port current (A): 500A

Battery Capacity: 3.7V - 200mAh

Stand-by Time: about 300 hrs

Play Time: 12 hrs

Talk Time: 12 hrs

Recharge Time: about 2 hrs

Weight: 160g