SWEEX SWBTHS100BL, SWBTHS100WH - Bluetooth Headphones Manual
  1. Manuals
  2. Brands
  3. SWEEX Manuals
  4. Headphone
  5. SWBTHS100BL
  6. User manual

SWEEX SWBTHS100BL, SWBTHS100WH - Bluetooth Headphones Manual

Advertisement

Table of Contents
Contents
SWEEX SWBTHS100BL, SWBTHS100WH - Bluetooth Headphones Manual

Description

Description

  1. On/off button Play/pause button

    Call button

    Redial button
  • Tap the button to switch on the device. Tap the button again to switch off the device.
  • Playback mode: Tap the button to play the track. Tap the button again to pause the track.
  • Tap and hold the button for 3 seconds to answer a call. Tap and hold the button for 3 seconds again to end the call and return to the interface.
  • Tap the button 2 times to redial the last phone number.
  1. Next button
    Volume + button
  • Tap the button to play the next track.
  • Tap and hold the button to increase the volume.
  1. Previous button Volume - button
  • Tap the button to play the previous track.
  • Tap and hold the button to decrease the volume.
  1. LED indicator (red / blue)
  • Pairing mode: The red and blue LED indicators flash alternately.
  • Pairing complete / Playback mode: The red LED indicator goes off. The blue LED indicator comes on.
  1. Microphone
  1. Headphone jack
  2. Headphone cable
  • Connect the headphone cable to the headphone jack.
  1. USB port
    (Micro USB)
  2. USB cable
  • To charge the device, connect the USB cable to the USB ports of the device and the computer or a USB adapter..


Pairing the headphones

  • Tap and hold the on/off button for 4 seconds to enter pairing mode.
  • Activate Bluetooth on your Bluetooth device.
  • Search for new devices on the Bluetooth device.
  • Select the device: "SWBTHS100BL" / "SWBTHS100WH".
  • The Bluetooth device will confirm when the pairing is completed.
  • If the pairing is completed, the device is in playback mode.

Technical data

Battery type Lithium-ion battery (300 mAh)
Input voltage (USB charging) 5V
Frequency response 20 Hz - 20 kHz
Impedance 32 Ω ± 5%
Signal-to-noise ratio (SNR) 95 ± 5 dB
Playback time ± 10 h
Charging duration ± 2 h
Bluetooth version 4.1 + EDR

Safety


RISK OF ELECTRIC SHOCK
DO NOT OPEN

  • To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
  • Disconnect the product from the mains and other equipment if a problem should occur.
  • Read the manual carefully before use. Keep the manual for future reference.
  • Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
  • Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Cleaning and maintenance

  • Do not use cleaning solvents or abrasives.
  • Do not clean the inside of the device.
  • Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
  • Clean the outside of the device using a soft, damp cloth.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download SWEEX SWBTHS100BL, SWBTHS100WH - Bluetooth Headphones Manual

Advertisement

Need help?

Need help?

Do you have a question about the SWBTHS100BL and is the answer not in the manual?

Questions and answers

Related Manuals for SWEEX SWBTHS100BL

Save Article as PDF

Table of Contents