Table of Contents
Advertisement
External equipment
You can connect a VCR, DVD player etc., and listen to the
audio through this system.
Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Rear panel of
this main unit
1
Connect the external equipment.
2
Press [SELECT <, >] repeatedly to select "AUX".
3
Play the external equipment.
Note:
• Do not bend cables at sharp angles.
• Components and cables are sold separately.
• Sound distortion can occur when you use an adaptor.
• If you want to connect equipment other than those
described, refer to the audio dealer.
AUX mode
[AKX520]
1
Press [PLAY MENU] to select "AUX MODE".
2
Press [R, T] to select the mode and then press
[OK].
MODE 1
Select this mode to use the Karaoke effect
(default)
function.
MODE 2
Select this mode when watching TV, movies
or using an external player with Karaoke
features.
18
18
DVD player (not supplied)
Audio cable
(not supplied)
Others
Auto off
This system automatically switches off when you do not
use it for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
• This function does not work when you are in radio source or
when a Bluetooth
device is connected.
®
• [AKX520]
This function may not work when a microphone is
connected.
Bluetooth
standby
®
This function automatically switches on the system when
you establish a Bluetooth
device.
1
Press [SETUP] repeatedly to select "BLUETOOTH
STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
Some devices may take longer to respond. If you are
connected to a Bluetooth
®
system, wait for a minimum of 5 seconds before connecting to
this system from your Bluetooth
Software update
Occasionally, Panasonic may release updated software
for this unit that may add or improve the way a feature
operates. These updates are available free of charge. For
more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
█ Checking the software version
1
Press [SETUP] repeatedly to select "SW VER."
and then press [OK].
The software version is shown.
2
Press [OK] again to exit.
connection from a paired
®
device before switching off the
device again.
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SC-AKX520 and is the answer not in the manual?
Questions and answers
How do I use the cd player as can't get working
To use the CD player on the Panasonic SC-AKX520:
1. Press [x] to open the disc tray.
2. Insert a disc with the label facing up.
3. Close the disc tray.
4. Press [4/9] to start playback.
5. Use [VOLUME/MULTI CONTROL] to browse tracks or albums.
6. To stop playback, press [8].
The system also supports CD-R/RW discs in CD-DA or MP3 formats.
This answer is automatically generated
Why is this Bluetooth not connecting with my phone?
The Panasonic SC-AKX520 Bluetooth may not be connecting to your phone due to several possible reasons:
1. Error F703 – If this error appears, it indicates a Bluetooth connection issue.
2. Device Not in Pairing Mode – Ensure the hi-fi system is in Bluetooth pairing mode.
3. Interference or Range Issues – The Bluetooth range is up to 10m, but obstacles or interference can reduce effectiveness.
4. Previously Paired Devices – If the system was previously connected to another device, try removing that connection or resetting the system.
5. Bluetooth Compatibility – Ensure your phone supports the Bluetooth standard required by the system.
6. Environmental Factors – Nearby electronic devices may cause interference.
Try restarting both the hi-fi system and your phone, clearing previous pairings, and keeping them within the recommended range.
This answer is automatically generated