Kryptonite Keeper 585 Combo - Folding Lock Manual

RESETTING COMBINATION

1. The factory combination setting is 0-0-0-0. Rotate lock dials to combination. (NOTE: the combination dials should align with thereference mark (<<< C >>>) ). Push the button (A) OR Pull out the Reset Dial (B) and hold while sliding out the link from the lock head.
   
   
2. Without moving the dials Pull out the Reset Dial (B) and rotate 90 degrees clockwise until it stops.
   
   
3. Rotate each Number Dial to set your new 4-digit combination. Use numbers that will be easy to remember. (NOTE: Make sure that the numbers you choose are correctly aligned with the reference mark (<<< C >>>))
   
   
4. Rotate the Reset Dial (B) back 90 degrees counterclockwise to the original position. Push the button (A) OR Pull out the Reset Dial (B) to test that your combination has been set. Return the link back into the lock head until you hear a click.
   
   
5. Rotate and scramble all the dials. Your Folding Lock is now locked!
   

MOUNTING BRACKET

WHAT'S INCLUDED

• Transport bracket (D)
• Two screws (E) (for mounting on braze-ons)
• Two washers (F) (for mounting on braze-ons)
• Two plastic mounting straps (G)
• Two plastic screws (H) (for securing the straps)
• Mounting port (J)

BRACKET INSTALLATION

1. Select your preferred mounting position: (Always align with lock head angled up)
   1. On your braze-ons (This is the recommended method if available)
   2. On your frame or seattube
      
      
      
2. Clean the area of any dirt and grime prior to installation
3. To mount in the preferred manner by screwing into the braze-ons, insert the screw (E) through the hole in the transport bracket (D), passing through the washer (F) before passing through the mounting port (J).
   1. Use a Phillips Head screwdriver to tighten the two provided screws through the bracket and into the bicycle frame until snug.
      
      
4. If your preferred mounting position is in another location on your bicycle frame or you do not have braze-ons, use the plastic mounting straps (G) (provided).
   1. Place the plastic mounting straps (G) through the mounting port (J) on the back of the transport bracket (D).
   2. Wrap the straps tightly around the bicycle frame so that the bracket is tight to the frame and does not move. Make sure the plastic screw portion is opposite the mounting ports (J).
   3. Take a flat head screwdriver to screw the plastic screws (H) into the mounting strap holes. Tighten until snug.
      
      
5. Insert lock into the open slot on the Bracket body and secure it in place with the attached strap. Perform an initial check for lock position to be sure the lock placement does not interfere with your pedal stroke, steering or braking/shifting functions. Jostle bike to confirm that transport bracket is secured tightly. Transport bracket should not move.

ANTI-THEFT PROTECTION OFFER (ATPO)

Kryptonite's Anti-Theft Protection Offer ("Offer") is an optional Offer that reimburses registered customers up to a specific monetary amount in the event their bike or powersport vehicle is stolen due to the unintended opening or breaking of the lock by force. The ATPO is available to customers who purchase certain u-locks, chains, & folding locks (ATPO noted on package and on website) in the following countries: Austria, Belgium, Bulgaria, Canada, Croatia, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Poland, Portugal, Romania, Slovenia, Spain, Sweden, Switzerland, United Kingdom, and the United States. To locate the ATPO protection amount, look for the sticker on the front of the Kryptonite lock package or check the product page on Kryptonite's website (kryptonitelock.com). To be eligible a customer must register online at the Kryptonite website (kryptonitelock.com) within 30 days of lock purchase. All reimbursements under such Offer are subject to the Kryptonite Offer's terms and conditions.

To register, visit Kryptonite's website and click on the "Register for Anti-Theft Protection" button right on the homepage of the Kryptonitelock.com site.

If a customer does not have internet access, they may request the registration documents by contacting Kryptonite in the United States via phone at 800-SAY-LOCK (729-5625) or 001 781-828-6655. The following information is required for registration: Customer contact details, lock information including a copy of the itemized receipt of purchase, key number of the subject lock, vehicle information including vehicle type (bike/powersport), base cost, serial #, an itemized copy of the bill of sale, and an image of the bicycle or powersport vehicle.

Note: If a customer has a custom or used bike or powersport vehicle and does not have a copy of the bill of sale, please provide an appraisal from a dealer that reflects the current value of the bike or powersport vehicle.

Registration fees range from just $9.99 for a one (1) year period to $29.99 for a five (5) year period. Products designed by Kryptonite as High & Ultimate security products are free to register for one (1) year and range up to $24.99 for five (5) years.

If eligible (based on the Offer terms and conditions), Kryptonite will reimburse the customer the lesser of

1. the base cost of the bike or powersport vehicle, excluding tax and accessories, in accordance with the amount listed for the subject lock; or
2. the theft deductible under any applicable insurance policy.

REMINDER – Cables and accessories are NOT covered under this Offer. If a customer purchases a u-lock/cable combination pack the u-lock is the only product covered under this Offer. Any theft occurring with the cable is not covered, as the cable is a secondary deterrent. See the product packaging for specific details on the proper use of this type of product.

For additional information regarding this Offer, please check out Kryptonite's ATPO FAQ section at kryptonite.zendesk.com. Questions may be submitted to Kryptonite through its website at kryptonitelock.com, or stop by a local independent bicycle or powersport dealer.

PROPER BICYCLE LOCK UP

Place the bike against an anchored stationary object. Place the Kryptonite folding lock around the stationary object, capturing the stationary object, the bike frame, and rear wheel. Check the lock before leaving the bike to be sure it is properly secured.

Tips:

• Always lock your bike in a well-lit area with high foot traffic.
• Always lock your bike to a solid object that the bike cannot be lifted over.
• Make sure the object that the bike is locked to cannot be cut or removed.
• Where possible always make sure the bike frame and both wheels are secure.
• Lock according to value of the bike – frame, back wheel, front wheel.
• Get the tightest fit possible! The less room inside the lock the better as it makes it difficult for thieves to use their tools.
• Always position the lock high off the ground to reduce attack methods.

COMBO SAFE

For as long as the customer owns the Kryptonite lock, if the combination is lost and it has been registered with Kryptonite, call Kryptonite to obtain the combination. If the combination changes after registration, please be sure to update the registration with Kryptonite.

To register the combination, complete the form on Kryptonite's website: Kryptonitelock.com > Customer Service > Register keys/combination.

CARE & MAINTENANCE

Lubricate the lock several times a year to keep the lock in its best working condition. Always use a lubricant that has only a silicone, or Teflon base. Face the combination dials upright and spray or drip the lubricant in between the dials and inside the locking deadbolt. Rotate the lock dials and let it sit for 5 minutes. Place a rag on the workstation and turn the lock over onto the rag for a few minutes.

Note: Do not use Standard WD-40! Standard WD-40 is a solvent for cleaning corrosion, not a lubricant and will remove lubricant in the dials. WD-40 Lubricant is ok to use.

LIFETIME LIMITED PRODUCT WARRANTY

Schlage Lock Company, LLC, through its Kryptonite division ("Kryptonite") extends a limited lifetime warranty to the original user of the products manufactured by Kryptonite (the "Products") against defects in material and workmanship. This warranty only applies to the Original User of Products. This warranty is not transferable. This warranty gives you specific legal rights, and you may also have other rights, which vary from location to location. For complete warranty information and additional terms and conditions please visit Kryptonite's website at www.kryptonitelock.com or call Kryptonite at 1-800-729-5625 (USA Only) or 001 781-828-6655.

To contact Kryptonite, go to www.kryptonitelock.com or call 1-800-SAY-LOCK (USA Only) or 001 781-828-6655.

Kryptonite
437 Turnpike Street
Canton, MA 02021
(781) 828-6655
www.kryptonitelock.com