Table of Contents
Advertisement
15.
Taking Product out of Operation
Prolec Limited is committed to complying with the upcoming European Directive of RoHS (Restriction of
Certain Hazardous Substances) and WEEE (Waste from Electrical and Electronic Equipment). PME is
subject to the WEEE directive, therefore any component must be returned to Prolec Ltd for correct
disposal or recycling.
The display and safety controller are fitted with internal batteries and must not be disposed of in landfill.
16.
Service and Repair
16.1.
Maintenance Review
Due to nature of the PME system's operating environment, changes in usage can occur. Prolec Ltd or the
service agreement holder must be notified of any changes in the pattern of use of the system for
consideration.
Any alterations or modifications to machine components which affect the system must be reported to
Prolec Ltd or via the service agreement holder.
To aid in the use of PME, all appropriate technical bulletins relating to PME must be assessed and
implemented as appropriate. This information is available from Prolec Ltd.
Prolec Ltd must be informed of any Prolec system component failure. Be it directly or via the service
agreement holder.
Technical consultation is available to the user, contact Prolec Ltd or the service agreement holder.
James Fisher Prolec Ltd
25 Benson Road
Nuffield Industrial Estate
Poole Dorset BH17 0GB
562400-000, Issue 1.3 January 2022
PME has very few user serviceable parts. The safety controller / I/O module have
internal fuses that can be replaced if required. The Service describes daily, monthly
and yearly checks that must be carried out to ensure safe operation of the system.
Telephone
+44 (0) 1202 441000
E-mail
service@prolec.co.uk
Page 58 of 61
Advertisement
Table of Contents
Need help?
Do you have a question about the James Fisher PME400 and is the answer not in the manual?
Questions and answers