Programs Menu - Kolver K-DUCER KDU-NT Operator's Manual

PROGRAMS menu

Programs represent batches of one or more screws sharing the same parameters (torque,
angle, speed, etc). With the K-DUCER series, you can define up to 64 different programs as
well as assign a barcode to each for automatic selection with a barcode scanner.
Tap the Programs button from the main menu to enter the programs menu.
Select one of 64 programs to edit by tapping on the program number or the arrows on the
top bar.
Enter one of the four sub-menus to modify the desired parameters for the program selected.
Vers. 111422 43