Page 1
Home Appliances QW-NS1CF49EI-ES QW-NS1CF49EW-ES Dishwasher User Manual...
Page 2
Thank you for choosing this product. This User Manual contains important information on safety and instructions intended to assist you in the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference.
1. SAFETY INSTRUCTIONS 1. General Safety Warnings • Read these instructions carefully before using your appliance and keep this manual for future reference. Please check the packaging of your machine before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened.
2. Installation Warnings • Choose a suitable and safe place to install your machine. • Only original spare parts should be used with the machine. Unplug the machine before installation. Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void.
The machine door should not be left open. It may cause accidents. Place knives and other sharp objects in the cutlery basket in a blade-down position. For models with the automatic door-opening system, when the EnergySave option is active, the door will open at the end of a program.
Page 8
the door for one minute after it has opened. For effective drying, keep the door open for 30 minutes after a programme has ended. Do not stand in front of the door after the auto-open signal sounds. In the case of a malfunction, repair should only be performed by an authorised service company, otherwise the warranty will be void.
Page 9
CE Declaration of Conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
WARNING: Use the new water inlet 2. INSTALLATION hose supplied with your machine, do not use an old machine’s hose. 2.1. Machine positioning WARNING: Run water through the When positioning the machine, place it in new hose before connecting. an area where dishes can be easily loaded and unloaded.
2.5. Electrical connection WARNING: Your machine is set to operate at 220-240 V. If the mains voltage supply to your machine is 110 V, connect a transformer of 110/220 V and 3000 W between the electrical connection. Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical Specifications"...
3. TECHNICAL SPECIFICATIONS 3.2 Technical specifications 10 place Capacity settings Dimensions Height 850(mm) Width 450(mm) Depth 598(mm) Net weight 39 kg Operating 220-240V voltage / 50 Hz, frequency Total current 10(A) Total power 3.1. General appearance 1900(W) 1. Worktop 2. Upper basket with racks Maximum: 3.
4..3 Fill the salt (IF AVAILABLE) 4. BEFORE USING To add softener salt, open the salt THE APPLIANCE compartment cap by turning it counter clockwise. (1) (2) At first use, fill the 4.1. Preparing your compartment with 1 kg salt and water (3) until dishwasher for first use it is almost overflowing.
4.4 Test Strip Run water Keep the Shake the Wait Set the hardness level of through the strip in the strip. (1min.) your machine. tap (1min.) water (1sec) second munite munite NOTE: The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend that you use filter and refinement devices.
Add the proper detergent for the selected 4.11 Rinse-aid usage program to ensure the best performance. The rinse aid helps to dry the dishes without The amount of detergent needed depends streaks and stains. Rinse-aid is required for on the cycle, load size, and soil level of stain-free utensils and clear glasses.
Page 16
Level Brightener Dose Indicator Rinse-aid not r1 is shown on the dispensed display. 1 dose is r2 is shown on the dispensed display. 2 doses are r3 is shown on the dispensed display. 3 doses are r4 is shown on the dispensed display.
5. LOADING YOUR WARNING: To avoid any possible DISHWASHER injuries, place long-handle and sharp- pointed knives with their sharp points facing down or horizontally on the baskets. For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings.
Top basket Fixed Rack Upper basket racks have two positions: open (a) and closed (b). You can place cups on the racks to be washed. You can also place long forks, knives and spoons on the racks laterally. Height adjustment The upper basket includes a mechanism which enables the height of the basket to be adjusted up (1) or down (2) without having...
5.3 Alternative Basket Loads Lower Basket Incorrect Loads Incorrect loading can cause poor washing and drying performance. Please follow the manufacturer's recommendations for a good performans result. Top Basket Incorrect Loads Important Note for Test Laboratories For detailed information required for tests according to EN normatives and a softcopy of the manual, please send the model name and serial number to the following...
6. PROGRAMME TABLE Program Quick 30’ 40° Eco 50° Express 50’ 65° Intensive 65° Name: Standard program for Suitable for lightly normally soiled daily Suitable for normally Suitable for heavily Type of Soil: soiled dishes and using dishes with soiled daily dishes soiled dishes.
7. THE CONTROL PANEL time is cancelled. 4. Remaining Time Indicator Programme flow can be monitored via the Wash, Rinse, Dry, End indicators (10) and Remaining Time Indicator. 5. Tablet Button Press the Tablet button to activate the Tablet option when using combined 6.1 3.1 5.1 detergent that contains salt and rinse aid.
7.2. Cancelling a programme NOTE: Child lock is activated/deacti- vated by pressing the Tablet button (5) for If you would like to cancel a programme about 3 seconds. When it is activated, all when it is running. leds blink and “CL” is shown on the Remaining Time Indicator (4) once.
Page 23
Buzzer Sound Control (Model Depending) To change the buzzer sound level, follow the below steps: 1. Open the door and press Half Load (6) and Tablet (5) buttons at the same time for 3 seconds. 2. When sound setting is recognized, buzzer gives a long sound and machine will display last set level, from “S0”...
8. CLEANING AND To remove and clean the filter combination, turn it counter clockwise and remove it by MAINTENANCE lifting it upwards (1).Pull the coarse filter out of the micro filter (2).Then pull and remove Cleaning your dishwasher is important to the metal filter (3).Rinse the filter with lots of maintain the machine’s service life water until it is free of residue.
8.3 Drain Pump Large food residues or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter. Warning Risk of cuts! When cleaning the waste water pump, ensure that you do not injure yourself on pieces of broken glass or pointed implements.
9. TROUBLESHOOTING FAULT POSSIBLE CAUSE TROUBLESHOOTING Your Dishwasher is not plugged in. Plug your Dishwasher in. Switch your Dishwasher on by pressing the Your Dishwasher is not switched on. On/Off button. Fuse blown. Check your indoor fuses. The programme does not start.
Page 27
FAULT POSSIBLE CAUSE TROUBLESHOOTING Use the correct amount of detergent, as Not enough detergent used. instructed in the programme table. Rinse aid dosage and/or water Increase rinse aid and/or water softener softener setting set too low. level. Whitish stains remains on dishes.
Page 28
AUTOMATIC FAULT WARNINGS AND WHAT TO DO TROUBLE POSSIBLE FAULT WHAT TO DO CODE Make sure the water inlet tap is open and water is flowing. Separate the inlet hose from the tap and clean the filter of Water inlet system failure the hose.
Page 29
Service & Support Visit Our Website sharphomeappliances.com Spain: +34 910 970 221 Portugal +351 220 280 290...