Advertisement
[ E 2 S 1 0 ] VCR LOCATE Command
(Function)
Transports tape to specified time-defined position.
(Command format)
E 2 S 1 0
H i o ~Fi i n d i c a t e s SMPTE time, minutes,
number i n tens and single d i g i t s .
(Note) Before using t h i s command, set the subcode generation mode to STOP
mode and the VCR to PLAY mode.
[ E 6 ] Command
This group of commands i s used as the data of the subcode generation.
[ E 6 S 0 0 ] Disc Type Setting
(Function)
By setting the disc type, generation of the LEAD-IN portion' s
subcode takes place i n accordance with the disc type.
(Command format)
E 6 S 0 0
N,N
(Remark) When the power i s f i r s t turned ON, the s e t t i n g i s NiN
[ E 6 S 0 1 ] F i r s t Track Number Setting
(Function)
0
During normal cutting and C D - W O uninterrupted w r i t i n g , specify the
disc' s f i r s t track number. This value i s used to create the LEAD-
IN data when s e t t i n g the t r a c k time.
before setting the track time.
(D
In the case of C D - W O incremental w r i t ing, s p e c i f y the value by
adding 1 to the last already written track number.
(Command format)
E 6 S 0
01 ^ Ni N
(Remark) When the power i s f i r s t turned ON, the s e t t i n g N1N2 =01.
! H I
H I M I
0
! N i N
$ /
2
DISC TYPE
2
CD-DA, CD-ROM
0 0
0 1
Undefined
Undefined
0 2
1 ! N i N
$ /
2
^ 99 (NiN
2
2
1 3
M I S I
S I F I
F I $ /
0
0
0
seconds, frame
2
Carry out t h i s command
are numeric values between 0 - 9 )
=00.
Advertisement
