Advertisement
Use the JBL Connect app for speaker configuration and software upgrade.
Bluetooth® version: 4.2
Support: A2DP V1.3, AVRCP V1.6
Transducer: 50 x 90 mm
Rated power: 30 W RMS
Frequency response: 60 Hz – 20 kHz
Signal-to-noise ratio: >80dB
Battery type: LITHIUM-ION POLYMER 27 Wh (EQUIVALENT to 3.6 V / 7500 mAh)
Battery charge time: 4 HOURS (5 V / 2.3 A)
Music playtime: UP to 20 hours (VARIES BY VOLUME LEVEL AND AUDIO CONTENT)
USB charge out: 5 V / 2 A (MAXIMUM)
Bluetooth® transmitter power: 0 – 20 dBm
Bluetooth® transmitter frequency range: 2.402 – 2.480 GHz
Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
Dimension (W × D × H): 220 x 95 x 93 mm
Weight: 965 g
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE WILL VARY DUE TO USAGE PATTERNS AND ENVIRONMENTAL CONDITIONS. DO NOT EXPOSE THE JBL CHARGE 4 TO LIQUIDS WITHOUT REMOVING ALL CABLE CONNECTIONS AND CLOSE THE CAP TIGHTLY. DO NOT EXPOSE JBL CHARGE 4 TO WATER WHILE CHARGING. IT MAY RESULT IN PERMANENT DAMAGE TO THE SPEAKER OR POWER SOURCE.
When using external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the JBL CHARGE4 and is the answer not in the manual?
Questions and answers