Raycon E50 Earbuds Manual

HOW TO CONNECT YOUR EARPHONES

1. Take your earphones out of the capsule and hold the control buttons of both earphones to power on, both earphones will connect automatically.
2. Turn on Bluetooth, search "Raycon E50 Eardrums" and click it to pair.
3. Enjoy your Eardrums earphones!

HOW TO CHARGE YOUR EARPHONES

1. Open the lid of the charging capsule.
2. Place the two earphones inside until the indicator lights on the earphones flash. Red means charging, and blue means fully charged.
3. Close the lid. It takes about 2 hours to fully charge the earphones.

HOW TO CHARGE YOUR CHARGING CAPSULE

1. To charge your capsule, plug the cable in the charging port and connect to a power source.
2. The indicator light on the capsule shows that the status is charging. Once the light turns off, the capsule is fully charged.
3. Your charging capsule can charge your earphones up to four times.

WHAT'S INSIDE

Raycon E50 Eardrums Earphones (Left and Right)
Charging Capsule
Charging Cable
Cord
Silicone Gel Tips
User Guide

UNIT AT A GLANCE

USAGE

Customization

Selecting the size of silicone gel tips:
The silicone gel tips with E50 earphones come in 7 sizes: Double small, small, medium small, medium, medium large, large and double large. Please select the right size according to your preference and fit it over the earphones.

Functions

Right Earphone		Left Earphone
Play / Pause Answer / Hang up	Single Press	Play / Pause Answer / Hang up
Double click: Next Song Triple click: Volume +	Double Press	Double click: Previous Song Triple click: Volume -
Power on / Siri Reject Calls	2 Sec Hold	Power on / Siri Reject Calls
Power off	4 Sec Press	Power off

You can also put the earphones into the capsule to power off.

Charging Schematic

Charging for Earphones

Charging
Both lights remain red
(Lights on capsule: remain red)

Fully Charged
Red LED lights turn off
(Lights on capsule: turn blue then turn off)

• Call / Play: about 4 hours
• Standby: about 2,000 hours
• Charging for Earphones 4 times
• Charging Time: about 2 hours

Charging for Capsule

Charging
The light remain red

Fully Charged
Blue LED light turn on

• Charging Time: About 2 hours

Easy Pairing Connection

1. Take your earphones out of the capsule and hold the control buttons of both earphones to power on.
   
   
2. Turn on Bluetooth, search "Raycon E50 Eardrums" and click it to pair.
   
   
3. Enjoy your Eardrums Earphones!
   

Right Earphone Single-Play Mode

Take the right earphone from the capsule and turn it on. Hold the control button of right earphone for 2 seconds to power on. The earphone should flash blue. When paired, the earphones should send out a voice prompt.

Turn on Bluetooth on your phone or laptop, search "Raycon E50 Eardrums-R" and click it to pair.

How to Sync Volume on an Android Phone

For newer Android smartphones (such as the Samsung S9 and Note 8), you can experience optimal audio quality by syncing your volume in the Bluetooth settings.

1. After connecting your device in Bluetooth, click on "options" in the upper right hand corner.
2. Click on 'Media volume sync'.
3. Turn on.

*Note: This function is available only to newer Android smartphones, and not in all models. Please note that listening to high volumes of audio for a long period of times is not recommended.

Restore Factory Setting

In the off state, hold the buttons of left and righ earphones for 8 seconds to restore to factory settings.

FAQ AND ADDITIONAL RESOURCES

For frequently asked questions about your device, simply go to www.rayconglobal.com/support. Select the product and you will find more resourses on how to operate your products including helpful tips and videos.

SAFETY GUIDELINES

Please follow the safety guidelines below at all times when operating or caring for your device.

• Be wary of any edges, uneven surfaces, and metal parts, including on accessories and product packaging, to prevent any possible injury or damage.
• Listen to music at a proper volume to avoid hurting your hearing and the earphones.
• Avoid storage in high temperatures, such as in a hot vehicle or in direct sunlight.
• Do not expose the earphones or any of its supplied parts to rain or other liquids.
• Do not drop or cause undue impact to the earphones.
• Do not modify, repair, or dismantle the product on your own.
• Do not use any dilutant or volatile liquid to clean the product.
• Do not use the product in a hazardous location.

SPECIFICATIONS

Model Number: RBE750
Bluetooth Connection Name: Raycon E50 Eardrums
Bluetooth Version: 5.0
Power Input: DC 5V / 1A
Earphone Battery Capacity: 3.7V / 50mAh X 2
Charging Capsule Battery Capacity: 3.7V / 750mAh
Call / Play Time: About 4 hours
Charging Time: About 2 hours
Support Pofiles: HSP / HFP / A2DP / AVRCP
Sensitivity: 95 ± 3dB
Frequency Response Range: 20 - 20000Hz
Bluetooth Range: up to 10 meter

SUPPORT

If your device is not functioning correctly, please visit www.rayconglobal.com/support for customer support, and we will be more than happy to help you.

LIMITED WARRANTY

For more information and instructions on how to get warranty service, visit www.rayconglobal.com/warranty

Thank you for choosing Raycon.