Ocpp 1.6 Json Additional Features; Remote Charge Initiation / Termination; Hard Reset/ Soft Reset; Unlocking The Socket - VESTEL EVC04 Series User Manual

5.5.3 - OCPP 1.6 JSON ADDITIONAL FEATURES

5.5.3.1 - REMOTE CHARGE INITIATION / TERMINATION

This feature is supported by the charging station. If it is also supported by the connected server,
then charging process may be initiated/terminated remotely.

5.5.3.2 - HARD RESET/ SOFT RESET

If the electric vehicle charging station is not working properly, the service provider may reset
the appliance with this feature. There are two types of resets: Software or hardware reset may
be selected.

5.5.3.3 - UNLOCKING THE SOCKET

If the charging cable is locked at the station, the service provider may unlock the cable via this
feature.

6 - LOCKED CABLE FUNCTION (Model with Socket)

The cable becomes locked and your socket model charging station starts behaving as an
attached cable model.
1- Turn off the power of your charging station.
3- To enable locked cable function, toggle DIP switch
pin 3 to ON position using pointed spudger or a
plastic pointed tool. The DIP switch location is as
shown in below figure.
1
IB v7.3.1 11.2021
Enabled
ON
1 2 3 4 5 6
Disabled
© 2021 Vestel - All rights reserved
2- Open the product cover as described in the
installation manual.
4- Close the product cover as described in the
installation manual.
English - 31