Table of Contents
Advertisement
Quick Links
DMX-192
192 Channel DMX Controller
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
A small yet versatile 192 channel DMX controller with 12 fixtures. Each fixture controls up to 16 channels
per unit. There are 23 programmable bank buttons each holding 8 scenes. These scenes can be
programmed into 6 chase sequences each holding up to 240 scenes which can be triggered by sound,
manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. A lightweight
and portable controller, ideal for small theatres or stage applications.
In the box:
Your DMX-192 should arrive with you in a single carton in good condition. The carton should contain
1 x main unit, 1 x UK power adaptor and 1 x user guide.
Controls Overview:
1.
2.
3.
4.
www.avsl.com
5.
6.
7.
Item ref: 154.103UK
User Manual
17.
11.
8.
9.
10.
154.103UK User Manual
16.
15.
14.
13.
12.
Advertisement
Table of Contents
Related Manuals for Qtx DMX-192
Summary of Contents for Qtx DMX-192
- Page 1 In the box: Your DMX-192 should arrive with you in a single carton in good condition. The carton should contain 1 x main unit, 1 x UK power adaptor and 1 x user guide.
- Page 2 Fixture selection buttons Press to select the desired lighting fixture Fixture indicator LEDs Lit to indicate the current selected fixture Channel faders Slide to adjust DMX parameter values Scene selection buttons Press to store and select scenes LCD display Displays current parameters or status Bank up button Step forward scenes/steps in banks/chases Bank down button...
- Page 3 Chase review: 1. Select a Chase button to review. 2. Press the Tap Sync display button to view the step number on the display. 3. Press the Bank up or Bank down buttons to review all scenes in the chase. NOTE: Make sure you are still in Manual mode.
- Page 4 4. Use Bank up or Bank down buttons to select destination Program bank. 5. Press the Music/Bank copy button button to copy to the new destination. NOTE: All LEDs will blink to confirm. Chase Programming A chase is created by using previously created scenes. Scenes become steps in a chase and can be arranged in any order you choose.
- Page 5 Deleting a Scene from a Chase: 1. Press and hold the Program button until the LED blinks. 2. Select the desired Chase button. 3. Press the Tap Sync Display Button to switch the display to step view. 4. Use Bank up or Bank down buttons to navigate to the Scene to be deleted. 5.
- Page 6 Playback Running in Sound mode: 1. Press and hold the Music/Bank copy button until the Music LED is lit. 2. Use Bank up or Bank down buttons to navigate to the bank which is to be run in Sound mode. 3.
Need help?
Do you have a question about the DMX-192 and is the answer not in the manual?
Questions and answers