Table of Contents
Advertisement
3. Battery Pack Replacement Procedure
Replace the battery pack in the following procedure:
1.
Exit from all applications and shutdown OS.
2.
Turn off the power of the server and remove all the power cords connected to the
power unit from the receptacles.
3.
Remove the side cover following the User's Guide of the server.
4.
Remove all the cables from the RAID controller and the server.
5.
Remove the screw fixing the RAID controller. Then remove the RAID controller
from the server.
6.
On the rear face of the RAID controller, remove the screws (3) fixing the BBU.
48
Advertisement
Table of Contents
