Hillsdale Furniture Stockport 4937-826 Assembly Instructions

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that
all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is
required.

HARDWARE LIST

A (10) 1/4" x 5/8" Allen Bolts
B (4) 1/4" x 3/4" Allen Bolts
C (6) 1/4" x 1" Allen Bolts
D (16) 1/4" Flat Washers
E (16) 1/4" Spring Washers
F (1) 1/4" Allen Wrench

PIECES LIST

G (1) Stool Back
H (1) Seat Base
I (4) Stool Legs
J (1) Support Ring
K (1) Stool Base

STEP 1

Begin assembly by attaching the Stool Back
(G) to the Seat Base (H) with 2 Allen Bolts (C),
2 Spring Washers (E) and 2 Flat Washers (D)
from the outside and 2 Allen Bolts (A), 2
Spring Washers (E) and 2 Flat Washers (D)
from the inside.

STEP 2

Next attach the Legs (I) to the Stool Base (K)
by using 4 Allen Bolts (A), 4 Spring Washers
(E) and 4 Flat Washers (D). Do not fully
tighten bolts.

STEP 3

Next attach the Support Ring (J) to the inside
of the Legs (I) with 1 Allen Bolt (B) per leg.
Tighten all bolts from steps 2 & 3 with Allen
Wrench (F) provided.

STEP 4

Finally attach the Seat Base (H) to the Stool
Base (K) by aligning the holes with those on
the swivel metal plate (located on the bottom
of the seat base) and securing with 1 Allen
Bolt (C), 1 Spring Washer (E) and 1 Flat
Washer (D) per hole. Tighten all bolts. The
assembly is now complete.
CARE & MAINTENANCE: The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
PART QTY HARDWARE
A 10
C 6
E 16
D
E
C
D
I
E
A
D
E
A
Page 1 of 1
PART QTY HARDWARE
B 4
D 16
F 1
G
H
K
B
B
B
B
J
D
E
I I
C
D
E
C
D
E
A