Advertisement
Messages
Description
PS3 Hard Disk
The writing of PostScript 3
commands on the optional
full
Hard Disk Drive is no longer
possible as the amount of space
allocated to PostScript 3 on the
Hard Disk Drive is used up.
The fuser unit has reached the
Replace Fuser
end of its service life. The error
automatically clears itself after
you replace both the fuser unit
and the second transfer roll.
Replace Oil
The fuser oil roll has reached the
Roll
end of its service life. Replace it
with a new fuser oil roll.
The photoconductor unit has
Replace
reached the end of its service
Photocondctr
life. You have to replace all
items included in the
photoconductor kit, which
includes the photoconductor
unit, the waste toner collector,
and the print head filter.
The error clears itself once you
have replaced all the items and
close the front and top covers.
The photoconductor counter
level is automatically reset.
Messages
Description
Replace
The transfer belt unit has
reached the end of its service
TransferBelt
life. Replace it with a new
transfer belt unit into the printer.
The waste toner collector is full
Replace Waste T
of toner. Replace it with a new
Box
waste toner collector.
The error clears itself after you
have replaced the waste toner
collector and close the front
cover.
Exxx/Cxxxx: Any number is
Service Req
indicated.
Exxx/ Service
Req Cxxxx
A controller error or a print
engine error has been
detected. Write down the error
number listed on the LCD panel
and turn off the printer. Wait at
least 10 seconds and then turn
it back on. If this error still occurs,
turn off the printer, unplug the
power cord, and contact a
qualified service representative.
26
26
26
26
Advertisement
