Home Accents Cauldron Witch Easy Assembly And Operation Instructions

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
Cauldron Witch
This item, when assembled by the following instructions,
should take 15 minutes to assemble. Please follow the step
by step guide and enjoy your Cauldron Witch!
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in it's
original packing. Keep away from heat and moisture.
PARTS LIST
A. Base
B. Lower Support Poles x 2
C. Upper Support Poles x 2
D. Torso Frame
E. Hip Hoop
F. Shoulder Support
G. Head
H. Costume
I. Right Arm
J. Left Arm
K. Cloak
L. Hat
M. Cauldron
N. Cauldron Support Poles x 6
O. Cauldron Light Support Frame
P-1. Top Stir Stick
P-2. Middle Stir Stick
P-3. Middle Stir Stick
P-4. Middle Stir Stick
P-5. Middle Stir Stick
P-6. Lower Stir Stick
UL Adapter *
* UL Power Adapter Spec
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 1.5A
1
2
3 B
A
STEP 1
NOTE: The longer end of the (A) Base goes towards the front.
Poles to the (A) Base by aligning the quick-connect push buttons into the pre-drilled holes. Then
set the cross-braces located at the (A) Base into the slot housings on the (B) Lower Support
Poles as shown in Figure 1 .
Assemble the (C) Upper Support Poles to the (B) Lower Support Poles
secure by aligning the quick-connect push buttons into the pre-drilled holes.
A
H
M
C
B
B
A
1
First, secure the (B) Lower Support
as shown in Figure 2
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that
can be a choking hazard. Keep all plastic and wire parts away from children.
1. Please use the transformer supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching
color.
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep all away from the transformer, as it heats up during operation.
Please read all instructions carefully before assembling. Save this instruction sheet for future
reference.
B C D
I J
N
C
D
C C
B
E
2
STEP 2
NOTE: The speaker on the Function Control Box located on the (D) Torso Frame should be facing
front.
Attach the (D) Torso Frame on top of the assembled (C/B) Support Poles
secure by aligning the quick-connect push buttons into the pre-drilled holes.
, and Attach the (E) Hip Hoop through the slots located on the (D) Torso Frame
Plug the Adapter into the input DC 5.9V on the function control box.
E F
K
O
P-1 P-2 P-3
(Not included)
D
E
1
OPTIONAL: If you choose to use the Step Here
Try-Me Activation Pad, plug the connector into
the input receiving jack marked "TRY ME" on the
Function Control Box and set the Step Here pad
2
in front of the character when ready to display.
Note: Do not plug the UL Power Adapter into
power outlet until item assembly is completed.
Model#5124417
G
L
P-4 P-5 P-6
UL
ADAPTER
STEP
HERE
as shown in Figure 1, and
as shown in Figure 2 .
1/3