Recording Favorite Tracks From Cd Onto A Single Tape (Program Edit Recording) - Kenwood XD Series Instruction Manual

54
Recording favorite tracks from CD onto a single tape
(Program edit recording)
Use the follow ing procedure to record CD tracks in the order programmed by yourself so that no tune is interrupted in the
middle at the ends of tape sides.
The tune interrupted at the end of tape side A is erased and side B starts from the beginning of that tune.
When equalizer, SRS 3D or another effect is applied
to the sound, the sound w ith the applied effect can
be recorded.
Recording preparations are required. ¤
1
Press so that the "PGM " indicator lights.
2
Enter disc Nos. and track Nos. in the order you w ant to record them. (Editing)
For the systems including the DP-H5:
Program other tracks by repeating steps 2 and 3 for each.
For the systems including the DP-M H5:
If you program tracks from more than one CD, repeat steps 1
to 3 for each.
3
Start edit recording.
O p π
1. When the CCRS key is pressed during playback of CD, the playback stops and the CCRS setting (preparation for edited recording) starts.
2. Edit recording is not possible w ith CDs containing a track that is longer than one tape side, w hich may occur w ith classical music, etc.
Notes Notes
3. If the deck is set for one-side recording ( " ), the processing at the tape end is applied only on side A.
Downloaded from: http://www.usersmanualguide.com/
OP
P.MODE
1 Enter the disc No. (DP-M H5 only)
DISC SKIP
Go to step 2 w ithin 8 seconds.
2 Enter the track No.
1 2 3
4 5 6
7 8 9
PTY
SEARCH
0 +10
3 Press the P.M ODE key to enter the
selection in memory.
To check the edited contents
To clear the edited contents
Blinks
CCRS
For C-H6: Character information indicators cannot be dis-
Note
Note played w hile the spectrum analyzer display is used. Sw itch
to the dual display or character display mode to see the
information.
¤ ¤ ¤
¤
For the reverse mode, select ""","[" (tw o-w ay recording).
The selected disc number is dis-
played w hen the DP-M H5 is used.
PGM M EM O
AUTO DISC
TUNED STEREO
Go to step
Press the numeric keys as show n below ....
3 w ithin
To enter track No. 23 : 003
8 seconds.
To select track No. 40 : 0000)
÷ Select CD tracks so that their total playing time does not exceed the
recording time of the tape.
÷ Up to 32 tracks can be programmed. When "FULL" is displayed, no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷ When the P.M ODE key is pressed w ithout selecting a title after
selection of a disc, all titles of the disc are programmed, so that the
CCRS function does not operate. Please begin again from step 1 .
÷ The REPEAT key is invalid.
Y
Y
During recording: X-H5
÷ The recording level and bias w ill be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after w hich recording
starts.
÷ For the systems including DP-M H5: In editing from more than one CD,
the CCRS setting operation is performed after every disc change. In this
case, the deck stops automatically and restart recording after having
completed the CCRS operation.
Lights
PGM M EM O EDIT RDS EON
C D *
AUTO DISC ALL
TUNED STEREO
M AX
SLEEP
Track No.
Program No.
EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
C D * ) 3 * P - )
ALL
M AX
Blinks Lights
REC / ARM
CCRS
Convenient CD recording
XD SERIES (En/ E2 )
!´
TA N
O.T.T
PROG. M UTE N.B.
: 1
12
5
4
3
kHz 2
1
M Hz 10
8 9
6 7
11 12 13 14 15