Neousys Nuvo-9000 Quick Manual

Quick Introduction Guide
Warning
• Only qualified service personnel should install and service this
product to avoid injury.
• Observe all ESD procedures during installation to avoid damaging
the equipment.
1
Preparing tools
Unpack the equipment and make sure the following tools are
available and delivered contents are correct.
1-1. User-provided tools
• Anti-static wrist wrap
1-2. Packing List
Item
Description
01 Nuvo-9000 system
Drivers & utilities disc
02
03 CPU bracket
04 Wall-mount bracket
Foot pad
05
3-pin pluggable terminal block
06
2.5" HDD/SSD thermal pad (
07
if HDD not installed
Rubber spacer (barebone system only)
08
Screw pack
09
3 USB3.2 Gen2x1 Port
The system's USB 3.2 Gen2x1 ports (10Gbps) are implemented
via native xHCI (eXtensible Host Controller Interface) controller
and are backward compatible with USB3.2 Gen.1 USB 2.0, USB
1.1 and USB 1.0 devices. UEFI USB is also supported so you can
use USB keyboard/ mouse in UEFI shell environment. Indicated in
red are screw-lock holes for the corresponding USB port.
xHCI driver is supported natively in Windows 10, therefore you do
not need to install the xHCI driver prior to utilizing USB functions.
2 Overview - Front Panel
Nuvo-9000
Quantity
1
1
1
2
4
2
)
1
4
1
4
USB2.0 Port
The USB2.0 ports are implemented via native xHCI (eXtensible Host
Controller Interface) and are backward compatible with USB 1.1 and
USB 1.0 devices. UEFI USB support is also provided so you can use
USB keyboard/ mouse in UEFI shell environment. Indicated in
a screw-lock hole for the corresponding USB port.
xHCI driver is supported natively in Windows 10, therefore you do not
need to install xHCI driver to utilize USB functions.
5 DVI Port
DVI-D transmits graphics data in digital format and therefore can
deliver better image quality at high resolution. The DVI connector on
the front panel can either output DVI signals or other digital signals (via
an adapter/ cable) depending on the display device connected. It
red is
supports resolutions up to 1920x1200@60Hz.
The system supports triple independent display outputs by connecting
display devices to VGA, DVI and DisplayPort connection. To support
multiple display outputs and achieve best DVI output resolution in
Windows, you need to install corresponding graphics driver.