Ltc Levelogger Edge - Solinst Levelogger Series User Manual

1.1.9 LTC Levelogger Edge

The LTC Levelogger Edge provides an accurate and convenient method to measure water level, temperature
and conductivity all in one probe.
Note: Solinst recommends using the most recent LTC Levelogger Edge firmware version with the latest Levelogger
Software version. See Section 2.3.
Level Sensor:
Ranges:
Accuracy:
Resolution:
Normalization:
Temp Comp. Range:
Temperature Sensor:
Accuracy:
Resolution:
Conductivity Sensor:
Full Range:
Calibrated Range:
Accuracy:
Resolution:
Normalization:
User Calibration Points:
Battery Life:
Clock Accuracy (typical):
Operating Temperature:
Memory:
Maximum # Readings:
Communication Speed:
Com Interface:
Size:
Weight:
Corrosion Resistance:
Other Wetted Materials:
Sampling Mode:
Measurement Rates:
Barometric Compensation:
M5
M10
M20
M30
M100
M200
LTC Levelogger Edge Technical Specifications
Piezoresistive Silicon with Hastelloy Sensor
15, 10, 20, 30, 100, and 200 m
± 0.05% FS
0.001% FS to 0.0006% FS
Automatic Temperature Compensation
0ºC to 50ºC
Platinum Resistance Temperature Detector (RTD)
± 0.05ºC
0.003ºC
4-Electrode Platinum
0 to 100,000 µS/cm
50 to 80,000 µS/cm
±1% 5,000 µS/cm - 80,000 µS/cm; greater of ±2% or 10 µS/cm from
50 µS/cm - 5,000 µS/cm
± 0.1 µS/cm
Specific Conductance normalized to 25ºC for full range
1413, 5000, 12,880, 80,000 µS
8 years (based on 1 reading every 5 minutes)
± 1 minute / year
-20ºC to 80ºC
Continuous or Slate Mode
27,000 sets of readings
9600 bps, 38,400 bps with USB optical reader
Optical Infrared: USB, RS-232, SDI-12
22 mm x 190 mm (7/8" x 7.5")
200 g (7.05 oz.)
Titanium ceramic PVD coated body and superior corrosion
resistant Hastelloy pressure sensor
Hastelloy, Delrin®, Viton®, Platinum
Linear, Event & User-Selectable Schedule with Repeat Mode,
Future Start, Future Stop, Real Time View
2 seconds to 99 hours
High accuracy, air-only, Barologger
Models Full Scale
5 m (16.4 ft.)
10 m (32.8 ft.)
20 m (65.6 ft.)
30 m (98.4 ft.)
100 m (328.1 ft.)
200 m (656.2 ft.)
Levelogger Series User Guide
Accuracy Resolution
± 0.3 cm (0.010 ft.) 0.001% FS
± 0.5 cm (0.016 ft.) 0.0006% FS
± 1 cm (0.032 ft.) 0.0006% FS
± 1.5 cm (0.064 ft.) 0.0006% FS
± 5 cm (0.164 ft.) 0.0006% FS
± 10 cm (0.328 ft.) 0.0006% FS
Page 14