Table of Contents
Advertisement
2. Mount the operator terminal into the cut-out. Insert the fixtures to the
holes on the unit and fasten the screws into the front panel. Do not tighten
the screws with too much force or it may cause the deformation of the oper-
ator terminal.
Maximum torque:
Maximum torgue: 0.3 Nm
0.4~0.5 Nm (3.54~4.42 lb-in)
3. The operator terminal is to be installed within the angle of 0 to 135
shown below.
ABB, 1SBC159101M0202
Product Specifications
STEP 1
STEP 2
STEP 3
°
as
11
Advertisement
Table of Contents
