Web User Interface; Functions Of The Web User Interface - Bender COMTRAXX CP9-I Series Manual

5. Web user interface

The web user interface of the device enables access via LAN, WLAN or the Internet. It provides a uni-
form display of Bender devices that are connected to:
The internal BMS bus

BCOM

Modbus RTU

Modbus TCP

Each interface has its own address range. Each device is given its own individual address by which it
can be identified.
5.1

Functions of the web user interface

Bus overview of the associated devices

– Indicating alarms and measured values
– Display by interface or subsystem
– Setting, displaying and evaluating the history memory and data loggers
– Graphical display of measured values (bar graph, phasor diagram, power triangle) and
waveform recorders; In case of universal measuring devices, additional display of the har-
monics as table or bar graph
– Setting device parameters
– Device failure monitoring
– Saving settings as "backup" and restoring values again
– Documenting settings and measured values
– Assigning individual texts for devices, measuring points (channels) and alarms
– E-mail notifications to different user groups according to a time-controlled schedule in the
event of alarms and system errors. The sender's e-mail address can be entered.
– Display of virtual devices. A virtual "measuring point" is obtained by logically or numerically
evaluating measured values of "real" devices connected to the gateway.
Management of Modbus devices

– Adding/deleting devices to/from the bus overview
– Creating a template with selected measured values
Visualisation

– Fast, simple visualisation can be configured in its own editor without programming
knowledge
– Measured values, alarms, buttons, etc. can be arranged and displayed in front of a graphic
(system diagram, room plan) using various widgets
– Displaying an overview page; jumping to another view page and back to the overview page
is possible
26
Web user interface
CP9xx-I_D00418_02_M_XXEN/04.2021