Related Manuals for OMEGAbilance Freestyle
Summary of Contents for OMEGAbilance Freestyle
- Page 1 Translated from Italian to English - www.onlinedoctranslator.com Electronic Scales Freestyle User manual Man. Use Freestyle-rev03...
-
Page 2: Warnings
THIS MANUAL MUST BE KEPT AVAILABLE TO METRIC INSPECTORS AND SUPERVISORY STAFF. THE ABOVE AVAILABILITY CONSTITUTES THE CONDITION FOR THE REGULAR USE OF THE INSTRUMENT AND FOR THE ADMISSION TO THE PERIODIC VERIFICATION REQUIRED BY THE REGULATIONS IN FORCE. Page 2 of 47 Man. Use Freestyle-rev03... -
Page 3: Scale Models
M. L IBRA ODELS F. R EESTYLE ADVANCE AS Page 3 of 47 Man. Use Freestyle-rev03... -
Page 4: Freestyle Advance Cs
F. R EESTYLE ADVANCE CS Page 4 of 47 Man. Use Freestyle-rev03... -
Page 5: Freestyle Advance Plc
F. R EESTYLE ADVANCE PLC Page 5 of 47 Man. Use Freestyle-rev03... -
Page 6: Freestyle Advance Pl
F. R EESTYLE ADVANCE PL M.F. F rOR Manual kingthevto0n3ce Rev.03 r e.eUS.storyle And-B. and andmsAndtygLto... - Page 7 Double receipt printer configuration Allows direct printing of each operator on continuous roll. Also in this case you can use a traditional support with liner, support material for adhesive paper, or even linerless rolls (self-adhesive) Page 7 of 47 Man. Use Freestyle-rev03...
-
Page 8: Freestyle Extreme As
F. R EESTYLE EXTREME AS Man. Use Freestyle-rev03... -
Page 9: Freestyle Extreme Cs
F. R EESTYLE EXTREME CS Page 9 of 47 Man. Use Freestyle-rev03... -
Page 10: Freestyle Extreme Plc
F. R EESTYLE EXTREME PLC Page 10 of 47 Man. Use Freestyle-rev03... -
Page 11: Freestyle Extreme Pl
F. R EESTYLE EXTREME PL 11 of 47 Man. Use Freestyle-rev03... -
Page 12: Thermal Paper
(linerless). Self-adhesive rolls that allow printing without having to have a support, liner. One of the main paper producers in the world is FASSON, whose technical data sheet is attached Page 12 of 47 Man. Use Freestyle-rev03... -
Page 13: Installing The Scale
Install a socket with side earth contacts (SCHUCO) for each scale; the connection to the earth line is essential to allow the OMEGA Freestyle scale to work correctly. It is also advisable that auxiliary sockets useful for test instruments are available near the scales. - Page 14 The scale is functional and ready for use. Graphics like the one in the figures below are shown on the customer and operator side displays Operator side Customer side Page 14 of 47 Man. Use Freestyle-rev03...
-
Page 15: Turning Off The Scale
A message will be shown informing you of automatic shutdown after 30 seconds, in case this is not canceled Press the "ENTER"To start the shutdown procedure (the OmegaBilance logo and the progress bar appear on the display) Page 15 of 47... -
Page 16: Scale Keyboard
The same keyboard the to during have only a numeric function. programming phase assumes the alphanumeric function with priority assigned to the symbol c n held in the single key Page 16 of 47 Man. Use Freestyle-rev03... -
Page 17: Advance 100 Keys
TO DVANCE 100 KEYS keyboard consists only of the DIRECT PLU keyboard block There DIRECT PLU keys Contains100keys to which the PLUs stored on the scale can be associated. Page 17 of 47 Man. Use Freestyle-rev03... -
Page 18: Extreme As (Self-Service Scale)
This new keyboard configuration used for the selection of the articles is composed of100keys. However, it is always possible to perform a new reconfiguration while maintaining an adequate proportion between key size and number of keys present Page 18 of 47 Man. Use Freestyle-rev03... -
Page 19: Extreme Plc - Pl - Cs
FIX=allows you to lock / unlock the tare value X=arithmetic operations attributed to non-weighed products OP =allows you to select an operator greater than 15 + and - =currently not used Page 19 of 47 Man. Use Freestyle-rev03... -
Page 20: Use Of The Scale
DEDUCTION OF TARE VALUES On the OMEGA Freestyle scale the tare values can be deducted in two different ways allowing the determination of the net weight. Reference has already been made to the tare associated with a PLU. If this... -
Page 21: Tare Block
- the button"C.”Or the key Transactions canceled will not be totalized. 2)Reopening the service: for Advance models or for Extreme models, and operate as - reopen the receipt using the key in the previous case. Page 21 of 47 Man. Use Freestyle-rev03... - Page 22 Page 22 of 47 Man. Use Freestyle-rev03...
-
Page 23: Printing The "Customer Total" Receipt
LOTS On the Freestyle scale the use of different traceability has been foreseen at the same time, i.e. it is possible to attribute different traceability information stored in the scale to the references present on it. - Page 24 PLU plotted, while operating in receipt mode, if the batch closing format is predetermined, it will print the summary of the batch data at the end of the receipt. This summary will report the data of all the lots used during the transactions carried out on the scale Rev.3 Page 24 of 47 Man. Use Freestyle-rev03...
-
Page 25: Examples Of Receipts With Traceability
The printed data are strictly related to the RECEIPT DESCRIPTION format in which the desired fields for printing have been inserted. The corresponding receipt description format must then be programmed in the counter information. Remember that traceability data are usually printed on the receipt. Page 25 of 47 Man. Use Freestyle-rev03... -
Page 26: Rapid Configuration Of Operating Mode
Causes a paper advance on the printer Check that there is no goods on the pan and that it is SEARCH ZERO not blocked by a foreign body. MODE CHANGE You see "Quick configuration of operating mode" OPERATION Page 26 of 47 Man. Use Freestyle-rev03... -
Page 27: Paper Roll Change
Pull the printing unit by pressing the lever on the right side of the scale fig. 1 Raise the print head by pressing the indicated key (fig. 2) fig. 2 In case of label roll, remove the first labels of the new roll fig. 3 Rev.3 Page 27 of 47 Man. Use Freestyle-rev03... - Page 28 6 fig. 5 fig. 6 fig. 7 Turn the roll holder knob counterclockwise to lock the roll into the housing fig. 8 Page 28 of 47 Man. Use Freestyle-rev03...
- Page 29 Insert the silicone paper into the slots of the rewinder and lock it by turning the latter counterclockwise fig. Close the head by pressing where indicated by the arrow, and close the drawer Page 29 of 47 Man. Use Freestyle-rev03...
-
Page 30: Scale With External Printer
Open the drawer door as shown in fig. 1 fig. 1 Raise the print head by pressing the indicated key (fig. 2) fig. 2 In case of label roll, remove the first labels of the new roll fig. 3 Rev.3 Page 30 of 47 Man. Use Freestyle-rev03... - Page 31 Insert the roll, making sure that the siliconized support follows the path indicated in red in figure 7. The passage of the paper in the head is indicated in figure 6 fig. 5 fig. 6 fig. 7 Page 31 of 47 Man. Use Freestyle-rev03...
- Page 32 Turn the roll holder knob counterclockwise to lock the roll into the housing fig. 8 Adjust the paper holder to keep the roll aligned against the drawer fig. 9 Unlock the rewinder by turning it clockwise fig. 10 Rev.3 Page 32 of 47 Man. Use Freestyle-rev03...
- Page 33 Insert the silicone paper into the slots of the rewinder and lock it by turning the latter counterclockwise fig. 11 Close the head by pressing where indicated by the arrow, and close the door Page 33 of 47 Man. Use Freestyle-rev03...
-
Page 34: Scale Programming
In the upper left corner (where indicated in the photo above by a red circle) In the upper right corner (where indicated in the photo above by a red circle) In the upper left corner (where indicated in the photo above by a red circle) EXTREME ADVANCE Page 34 of 47 Man. Use Freestyle-rev03... -
Page 35: Operator Menu
Upon entering the scale menu, the following operator menu will be displayed. It will be possible to return to this screen at any time by pressing the icon Where is it: allows you to align the paper allows to carry out a weight alignment (zero search) Page 35 of 47 Man. Use Freestyle-rev03... -
Page 36: Net
DNS-Specify the DNS server HARDWARE Access the following by pressing the icon In the following configuration menu you can access the section dedicated to SETTINGS. The foreseen calibrations are those referred to the printer. Page 36 of 47 Man. Use Freestyle-rev03... -
Page 37: Printer
The default value is 294. Enter a larger value to increase the label spill (the recommended value for the label roll is 315) SCALE SETTINGS Access the following by pressing the icon When entering the menu, all the set values are shown: Page 37 of 47 Man. Use Freestyle-rev03... -
Page 38: Generators Number Of Receipts
The DEFAULT is used by the machine when no parameter is entered in the BANK data or in the data referring to the single PLU. By no parameter is meant -1 Default Page 38 of 47 Man. Use Freestyle-rev03... - Page 39 We remind you that at any time it is possible, through the use of Net7, to insert a new format in the scale, thus increasing the possibilities of choice. Page 39 of 47 Man. Use Freestyle-rev03...
- Page 40 We remind you that at any time it is possible, through the use of a Personal Computer, to insert a new format in the scale, thus increasing the possibilities of choice. CUSTOMER side viewer: part of the view that is changed by selecting a new format Page 40 of 47 Man. Use Freestyle-rev03...
-
Page 41: Example Of Use Formats
LOTS. The format in question consists of the following fields: Lot No. Information related to traceability described on several lines This information is printed only if LOTS are used on the receipt. Page 41 of 47 Man. Use Freestyle-rev03... -
Page 42: The Nfo Scale
Access the following by pressing the icon This window shows general information on the system contained in the scale. In particular: FREESTYLE VERSION-This information refers to the version of the scale application used KEYBOARD VERSION-This information refers to the version of the keyboard firmware used... - Page 43 Service iindicates a keyboard calibration operation with closed seals. (Appears when changing metric parameters) The progressive numbering and the dates of the last 16 calibration procedures will be displayed. Page 43 of 47 Man. Use Freestyle-rev03...
-
Page 44: Operating Messages
An error has occurred in the management of the scale printer: switch the scale off and on again. If the message reappears, call the After-Sales Service. PRINTER COVER OPEN The printer cover is open. Press on it then to lower the head. Page 44 of 47 Man. Use Freestyle-rev03... -
Page 45: Interface Icons
Indicates that the weight displayed in the “Weight Kg” box is a net weight After pressing the FIX key, it indicates that the tare is fixed. Indicates that a manual tare has been entered. Page 45 of 47 Man. Use Freestyle-rev03... -
Page 46: Table Of Contents
SUMMARY WARNINGS................................2 SCALE MODELS ............................3 FREESTYLE ADVANCE AS ..........................3 FREESTYLE ADVANCE CS ..........................4 FREESTYLE ADVANCE PLC ..........................5 FREESTYLE ADVANCE PL ..........................6 FREESTYLE EXTREME AS ..........................7 FREESTYLE EXTREME CS .......... - Page 47 PRINTER ERROR ............................44 PRINTER COVER OPEN ........................ 44 INTERFACE ICONS ............................45 OMEGA B LANCE SRL single-member company Via Bettolino, 17 21013 Gallarate (VA) Italy Tel: (+39) 0331 1527940 www.omegabilance.it info@omegabilance.it Man. Use Freestyle-rev03...
Need help?
Do you have a question about the Freestyle and is the answer not in the manual?
Questions and answers