Connecting The Iq Fiber Master - Anritsu IQ Fiber Master MT2780A User Manual

Instrument Overview

Connecting the IQ Fiber Master

To connect the IQ Fiber Master follow the steps below:
1. Using an Ethernet cable connect the IQ Fiber Master analyzer with a PC or laptop connected to the
Internet. You may also use an Ethernet hub to connect the computer and analyzer. Contact your local IT
department in case of any applicable restrictions.
2. Power On the IQ Fiber Master and wait for status light (STS) to turn green.
3. Click the Sensor drop-down menu of the 1. Site Editor tab, and select the connected sensor identified by
the serial number.
Note The sensor serial number will always be preceded by MT2780A.
.
Figure 2-3. Selecting Sensor Serial Number
4. Click the Connect button.
Figure 2-4. Connecting IQ Fiber Master
MT2780A UG
2-3 Installation of IQ Fiber Master Control Software (MX280020A)
PN: 10580-00467 Rev. C 2-5