Tester Features - Hyundai CADEX RAPID RC BATTERY TESTER Technical Service Bulletin

CADEX 12V "RAPID RC BATTERY TESTER" TOOL AND BATTERY WARRANTY POLICY
SUBJECT:

Tester Features

:
Top View:
Top View Diagram
1
2 OK
▲
3
◄ ►
▼
4 ALT
5
6 Keyboard
7 Main Display
8 Printer
9
10 Battery Clamps
11 Calibration Shunt
Rear View Diagram:
1 Serial Port
2 Battery Clamp
Port
3 Input Power Port
TSB #: 16-EE-001-1
:
The Power button. Press and hold to turn the tester on or off.
Press to start tests, confirm settings, and select menu items.
Keypad direction keys. Press to scroll through menus, results, and settings.
Press to change the data entry mode to numbers/symbols, upper case letters, or lower case
letters. The indicator on the upper right of the screen shows which mode is currently active:
# – Numbers and symbols
A – Upper case letters
a – Lower case letters
If the ALT key won't toggle and the indicator stays in # mode, it means only numbers can be
entered on that screen.
The Back (or Escape) key. Press to exit menus and result screens (without saving any
changes). Press twice to show the internal battery level of the tester.
Use to enter data on certain screens.
The LCD viewing panel
The embedded printer
These buttons have no effect; do not use them.
Connect these clamps to the battery terminals. The red clamp connects to the positive (+)
terminal and the black clamp to the negative (-) terminal.
Use to calibrate the tester when it requests calibration.
Plug the supplied serial cable into this port to connect the tester to a computer.
Connect the battery cable to this 15-pin port.
Connect the external power supply here.
Screen name
T e s t B a t t e r y .
S a v e d R e s u l t s
S y s t e m S e t t i n g s
Selection list
V o l t s : 1 2 . 7 4 V
Connected
battery voltage
M A I N M E N U . #
Tester charger
connected
Rear View:
Data entry
mode indicator
Tester internal
battery state
Page 3 of 12