Machine Translated by Google
Demonstration
function
for changing the panel display
When you plug the power cord into an
outlet, the display panel automatically lights
up and you can enjoy watching it change
one after another . This is called a demo
(demonstration) function.
At the time of purchase, the demo function is
set to "On". If the demo function is left "on",
even if the power is turned off, the display
panel will not turn off and the demo function
will work.
ÿ To turn off the demo function
DEMO
While the demo function is running
Keep pressing until "DEMO
OFF" is displayed.
Each time you keep pressing
DEMO OFF (cut)ÿ
The demo function is automatically turned
off when the clock of the unit is set. For
details on how to set the clock, see
"Setting the clock" ( page 8).
Note If
the power plug is unplugged for about a week or
more, the demo function will return to "on". Turn it
off again by following the steps above.
Save energy by using it wisely
Attached by warranty
DEMO OFF
DEMO mode on
(in)ÿ
Personal MD system
Product number RX-MDX55
Thank you for purchasing the Personal MD
System. ÿ Please read this instruction manual
and warranty carefully and use the product
correctly . Then save it and read it when
necessary. ÿPlease receive the warranty from
the store after confirming that the date of
purchase and store name are entered.
instruction manual
RQT6010-S