[Format]; Initializing The Card; Format Initializing The Card - Leica C-Lux 1 Instructions Manual

Press / to select [YES] or
[NO] and then press [MENU/SET].
ASPECT CONV.
DELETE ORIGINAL
PICTURE?
CANCEL
• The picture is overwritten when you
select [YES]. If you convert the aspect
ratio of a picture and then overwrite it,
you cannot restore it.
• A picture with the converted aspect ratio
is newly created when you select [NO].
• When the original picture is protected,
you cannot overwrite it. Select [NO] and
newly create a picture with the
converted aspect ratio.
Press [MENU/SET] twice to close
the menu.
• After converting the aspect ratio, the
picture size may become larger than that
of the original picture.
• The following pictures cannot be
converted:
– Pictures with audio
– Motion pictures
• Files that do not conform to the DCF
standard cannot be converted. DCF is an
abbreviation of [Design rule for Camera
File system].
YES
NO
MENU
SELECT SET
/SET

[FORMAT]

Initializing the card

Press [ ] to display the [PLAY] mode
MENU
/SET
menu and select the item to set. (P72)
Usually, it is not necessary to format the
card. Format it when the message
[MEMORY CARD ERROR] appears.
Press to select [YES] and then
press [MENU/SET].
FORMAT
DELETE ALL DATA
ON THE MEMORY CARD?
SELECT
• Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
(P14) or the AC adaptor (ACA-DC4-E/U/J;
optional) when formatting.
• Do not turn the camera off during
formatting.
• You cannot format an SD Memory Card
when the card's write protect switch is set
to [LOCK].
• If the card cannot be formatted, consult
your nearest Leica dealer.
Menu Settings
YES
NO
MENU
/SET
SET
81