Advertisement
Configuration
Camius software expands the usability of your security system, available for PC
and Mac computers.
Use Device Config tool to:
- Find your Camius devices and connect them to your PC locally.
- Change your Camius devices' network settings.
- Upgrade the firmware of your Camius devices.
Camius VMS is a Video Management Software for PC and Mac, with it you can:
- Link your Camius devices to monitor and manage locally and remotely.
- Access Device Configuration and change settings.
- Playback video and audio, locally and remotely.
Camius Video Player is a PC/Mac software used to playback video/audio files
exported from your Camius device with MP4, AVI, and RF extensions using
Video Player. The user can capture clear screenshots, trim critical parts of the
video file, and play multiple files simultaneously.
Setting up on a Camius NVR
In order to complete the Camius recorder's initial setup, attach a monitor and a mouse to the
HDMI and USB ports on the recorder. The startup wizard will guide you through creating a
password, adjusting the date and time, and adding channels. The recorder password can be
used to add your recorder to the Camius View App and VMS software.
Default values
Camius IP cameras have DHCP enabled by default which allows your router to assign a local
IP address. Use Device Config Tool to locate the IP address of your camera; The default media
port is 9988.
The default username is admin, and the password is admin for the following IP cameras:
(BoltX5P, BoltX5PA, BoltX8, Iris536, Iris528a, Iris8, BoltVM5, Scout20PTZ, GuardMA).
As for R-series camera models (BoltX5R, Iris5R, Spot8R, Spot8RS, etc.), the camera will
require the user to set up a password on first browser access; there is no need to set
Page 3 of 5
Advertisement
