BAHAMA Jumbrella Important Information Manual

Hide thumbs

page of 56

/ 56
Bookmarks

Quick Links

Download this manual

- Important Information –

Jumbrella

www.bahama.de

Need help?

Do you have a question about the Jumbrella and is the answer not in the manual?

Questions and answers

Summary of Contents for BAHAMA Jumbrella

Page 2 1.42 To move the yet soft-wrapped umbrella on site (prior to erect it to its vertical position in place): Lift it (by no less than two persons – in case of the larger models & especially Jumbrella XL by no less than 4 persons) at a time, and carry it! Never, in whole or in part –...
Page 3 General Procedures for Erecting & Installing in Miscellaneous Footing Devices. 2.1 Every Jumbrella comes with its bottom major pole end factory-preassembled relative to the type of Bahama footing component that was selected by the orderer, and that either was shipped together with the umbrella or had been shipped ahead for preparatory works on site.
Page 4 3.4 Both the cone-shaped solid top cover (apex element) and the (white) screw-ball to be taken from the accessory package coming with every Jumbrella. The larger & heavier models come with a factory-fixed crane eyelet, which has to be removed first. Put the solid cover on top of the structure. Make sure it touches down and engages distinctly.
Page 5 (of 3-piece Universal In-Ground Bases with tipping hinge, Portable Universal Foot and Octagonal On-Deck Base as well), lock it up, and pull the the key off. This is to prevent the Jumbrella from being dismantled & removed from its footing (by unauthorized hands). The Jumbrella XL, however, is an exception: Due to its considerably high dead weight, such theft-prevention device is not necessarily required.
Page 6 – so to prevent the Jumbrella from getting unfolded by unauthorized persons. 4.8 In case you intend to refold and secure the Jumbrella for a longer term i.e for more than 1 to 2 weeks, and provided the structure was orderered to come with its (optional) reusable, made-to-measure protective cover...
Page 7 – even though more exposed to weathering – lives the longer the less frequently the Jumbrella is refolded overnight. 5.3 Should you already be caught in a storm or a typical squall front (typical of preceding a thunderstorm), don’t try (surely with the presumedly best intentions) to detension &...
Page 8 Bahama Swift Belt to secure the umbrella. Other items such as ropes and tapes will damage the textile membrane © 2018 Bahama GmbH - Germany www.bahama.de...
Page 9 Otherwise, non-removable mould stains will develop. - In case your Bahama umbrella is to remain installed outside during the winter, you should take off the membrane, secure the frame with the Bahama swift belt and wrap it with the...
Page 10 Care and Maintenance of your Bahama Membranes and Umbrellas … - While rodents usually disdain clean(ed) membranes, they have a tendency to infest dirty and deteriorated textiles, which - in turn - can only be disposed after having been eaten away.
Page 11 Jumbrella Operating Instructions Page 1...
Page 12 Page 2...
Page 13 Jumbella with a brand-new membrane is kept outdoors, tensioned exposed to different weather conditions (wet/dry/cold/warm), the earlier the leakages will disappear. Important Information: Larger Jumbrella models have tension rods with twin hooks instead of single (red arrow) hooks...
Page 14 Jumbrella (6 x 4.5 m) with 3 swift belts*. the number of Bahama swift belts used for securing varies depending on the umbrella size (please refer to page 1) Use the key to unlock both cylinder locks. Then remove these and keep them for...
Page 15 Loosen the fabric sections that are winded around the Jumbrella frame. Especially for Jumbrellas with valances make sure that the valances are not turned upwards at the canopy edgeline.
Page 16 Step Description Image … get underneath the Jumbrella. By using the right-hand tension latch push the carriage upwards to engage the spring clip into the first hook on the tension rod. Turn the right-hand latch all the way down and then …...
Page 17 Step Description Image Now turn the left-hand latch all the way down. The Jumbrella is now pre-tensioned only. Jumbrellas with the single hook system are now fully tensioned Use the right-hand tension latch to engage the spring clip into the...
Page 18 Steps 13 - 18 are not applicable for Jumbrellas with single hook system. Once this step is completed the Jumbrella is fully tensioned and unfolded. Steps 13 - 18 are not applicable for Jumbrellas with single hook system.
Page 19 Description Image Your Jumbrella is now open and fully tensioned. Reverse Order Jumbrella Closing & Securing Step Description Image The Jumbrella in its open and fully tensioned condition. Both tension latches have been secured by a cylinder lock. Page 9...
Page 20 Step Description Image Use the keys to unlock both cylinder locks. Then remove these and keep them for reinsertion once the umbrella has been fully closed. Start the closing process by pulling the left- hand tension latch slowly upwards. Steps 23 - 27 are not applicable for Jumbrellas with single hook system.
Page 21 Steps 23 - 27 are not applicable for Jumbrellas with single hook system. Then re-engage it in the first hook. The Jumbrella is now back in its pre-tensioned state. Jumbrellas with the single hook system fully tensioned in this position !
Page 22 Step Description Image … disengage the spring clip from the lower hook. Repeat this step with the right-hand latch by ... … pulling the carriage slightly upwards. Keep the left-hand latch partly open. Page 12...
Page 23 Step Description Image Pull the carriage down. Get out from underneath the Jumbrella and use the diagonal spoke to gently push frame together. Once the Jumbrella has reached its closed position carefully pull the fabric sections of the spokes. Do not rip...
Page 24 Wrap the swift belts properly around the folded frame. Push the left-hand latch into its final position, where it re-connects with the unfold prevention device. Re-insert both cylinder locks and lock up the Jumbrella. Keep the keys in a safe place for reusage. Page 14...
Page 25 Step Description Image Use Bahama swift belts only Refrain from using any other materials as it will damage the textile membrane. Recommendation Protective Cover: For storage, especially in the winter time, we recommend the usage of our protective cover with telescopic rod.
Page 26 Page 16...
Page 27 Page 17...
Page 28 Bahama GmbH Gewerbeparkstrasse 34 D-51580 Reichshof +49 (0)2265 998 0 +49 (0) 2265 998 300 info@bahama.de www.bahama.de Page 18...
Page 29 Clarification of the technically inevitable, just limited initial permeability of rainwater: In the event you experience that the fabric membrane of any factory-new Bahama umbrella structure just installed and commissioned or the factory-new replacement membrane – contrary to your expectations –...
Page 30 Screw M8 x 25 A4 C-Part 1 pc. Elastic Washer D-Ring 1 pc. Cylinder Head Screw M8 x 35 A4 | DIN 7984 4 pcs. micro-encapsulated Socket Head Screw Cylinder Lock + keys © 2018 Bahama GmbH - Germany www.bahama.de...
Page 31 (inside the major pole) with e.g. Vaseline, when newly or re-installing the umbrella in order to protect it from penetrating water and to ensure a smooth disassembly of the umbrella. adapter rail insert © 2018 Bahama GmbH - Germany www.bahama.de...
Page 32 »Octagonal On-Deck Base« # 0334-10/E or # 0335-12/E ?” For illustrating and releasing these amending instructions, photos were taken of a rectangular 4x3- metre JUMBRELLA model in conjunction with an Octagonal On-Deck Base # 0334-10/E. Picture showing the bottom part of the JUMBRELLA’s telescopic...
Page 33 – 2 – ….. unscrew the long special screwbolt ”A” with its metal & additional plastic washer. Picture showing opening (red arrow) empty. Srewbolt A & its 2 washers that you removed will be reused later. By-pack (contained in the transport cylinder, right behind the circular cover of the opening end of the cyl- inder) consisting of...
Page 34 – 3 – By-pack (also contained in the transport cylinder as said before – pict. 04) consisting of details 8 = locking block 9 = spec. screwbolt to 8 10 = cylinder lock with keys for 8 (upon insertion of 9) 11 = dual fastening screw with counter-nut 12 = open-end wrench for tight-...
Page 35 (detail 8) by screwing in & tightening the long special screw (detail Relative to the 4x3-m JUMBRELLA model, both pole openings must visibly be located left inside the slot-hole windows ! – / 5...
Page 36 – 5 – 1. Use the long special screwbolt A (long red arrow) with its two washers (detail 9) to mount block (detail 8) onto the re- ceiving sleeve of the base. 2. Reinsert cylinder lock (detail 10 – blue arrow) into the resid- ual cave of the locking block, lock up, and pull keys off.
Page 37 They occur when the umbrella is closed while the fabric is still wet. Therefore, you should always make sure that the fabric is 100% dry before closing and folding the umbrella. © 2018 Bahama GmbH - Germany www.bahama.de...
Page 38 Event Jumbrella Jumbrella XL Protective Cover - comfort - with telescopic rod For storage, especially in the winter time, we recommend the usage of our protective cover with telescopic rod. Advantages: It facilitates the cover up because: - a step ladder is...
Page 39 Step Description Image Squeeze top loop and the zipper loop together to facilitate the use of the telescopic rod. Use the hook on the very top of the rod to lift the protective cover. Now move it alongside the closed umbrella. Use your other arm and reach around umbrella.
Page 40 Step Description Image Use the second hook of the telescopic rod and place it inside the zipper loop. Then pull it down until… … you can reach the zipper with your hand. Retract the telescopic rod again and place it inside the pocket on the bottom of the right...
Page 41 Step Description Image Whenever you wish to remove the protective cover again, perform all steps in reversed order. Bahama GmbH Gewerbeparkstrasse 34 D-51580 Reichshof +49 (0)2265 998 0 +49 (0) 2265 998 300 info@bahama.de www.bahama.de Page 4...
Page 42 Bahama Textile Gutters | Mounting Instructions 3.0 × 3.0 m 3.53 × 3.53 m 4.0 × 4.0 m 4.5 × 4.5 m 5.0 × 5.0 m Square 8 spokes 8 spokes 8 spokes 8 spokes 8 spokes...
Page 43 Several umbrellas can either be synced to one and the same zone or to different zones. Resetting the controller: Press and hold the learning switch until the LED strips flash and return to white light. Bahama GmbH made in Germany Installation Manual | LED...
Page 44 If two channels are selected one after another, the two colors are mixed. To avoid mixing, the color selected first needs to be deselected before choosing another color. Bahama GmbH made in Germany Installation Manual | LED Tel +49 (0)2265 998 0...
Page 45 “connection with the WiFi LED Controller“ - “Rooms“ and select the room to which the “Yes“ to confirm the question umbrella shall be programmed - “Setting“ Bahama GmbH made in Germany Installation Manual | LED Tel +49 (0)2265 998 0...
Page 46 Again select the room to which the umbrella shall be programmed. The room name and photo can be edited afterwards as desired for better identifying each umbrella. Bahama GmbH made in Germany Installation Manual | LED Tel +49 (0)2265 998 0...
Page 47 Should you not be able to properly connect the LED controller, press the „Learning Switch“ on the controller until the LED strips flash (min. 3 seconds). This will completely reset the controller. Repeat the aforedescribed steps. Bahama GmbH made in Germany...
Page 48 No matter which umbrella model is selected, the radiators should always be distributed evenly to the support spokes. The only exception to this are square/rectangular Jumbrella XL models: for these the radiators need to be mounted on the diagonal/corner support spokes.
Page 49 For dismounting the radiators, carry out the installation steps 1.1 through 1.8 in reverse order. Please make sure that the power supply is switched off in the External Control Unit. Bahama GmbH | Gewerbeparkstr. 34 | D-51580 Reichshof info@bahama.de | 0049 (0)2265/998-0 |...
Page 50 There are six different performance levels: 33%, 50%, 66%, 80%, 88%, 100%. WARNING: When the radiators are in operation, any physical contact should be avoided since the radiators‘ metal bodies become extremely hot. Bahama GmbH | Gewerbeparkstr. 34 | D-51580 Reichshof info@bahama.de | 0049 (0)2265/998-0 | www.bahama.de...
Page 51 Note: You might have to slide the radiator further down. (This is especially required for radiators that are mounted to the diagonal support spokes of rectangular models.) Bahama GmbH | Gewerbeparkstr. 34 | D-51580 Reichshof info@bahama.de | 0049 (0)2265/998-0 |...
Page 52 Make sure that the screws of the tilting bracket don’t loosen too far – re-tighten if necessary • Make sure that the umbrella’s power supply is switched off while dismounting the heating radiators Bahama GmbH | Gewerbeparkstr. 34 | D-51580 Reichshof info@bahama.de | 0049 (0)2265/998-0 | www.bahama.de...
Page 53 General Terms and Conditions 01/2017 A. Offer and conclusion of contract D. Transfer of risk Offers are, as a rule, made free of charge. Plans/layouts are 1. Risk is transferred to the customer as soon as the shipment made free of charge only when expressly agreed or the has been dispatched on our means of transport or has been supply agreement becomes and remains legally binding.
Page 54 F. Warranty for quality defects and compensation for owner-user (failure to have them cleaned by the BAHAMA damages factory’s specialized maintenance division), excessive 1. We are liable for recognizable or hidden defects within the...