Table of Contents
Advertisement
CHAPTER 4 SETUP PROCEDURE
4.2 Removing Emulation Board
<1> Place the case down horizontally.
<2> Disconnect the power supply cable and the host interface cable.
<3> Refer to 4.1 Removing Probe and Replacing Clock Module for the procedure up to the removal of front
cover 1.
<4> Loosen the 2 screws indicated by the arrows.
Figure 4-3. Opening/Closing Cover Step 2 (Loosening Screws)
25
User's Manual U16594EJ1V0UM
Advertisement
Table of Contents
