Related Manuals for Piazzetta Thermo P966
Summary of Contents for Piazzetta Thermo P966
- Page 9 TITLE PAGE GENERAL RECCOMENDATIONS HEATING CAPACITY PREPARING FOR INSTALLATION INSTALLATION ENVIRONMENT MINIMUM SAFETY DISTANCES FRESH AIR INTAKE FLUEWAY EXISTING FLUE IN GOOD CONDITION SOOT INSPECTION EXISTING FLUE REQUIRING RENOVATION NO EXISTING FLUE CHIMNEY STACK CONNECTION TO THE FLUE UNION TEE INSTALLATION WATER CIRCUIT ARRANGEMENT WATER CONNECTIONS...
- Page 31 ( Normal / Low Permeability ) 129 / 157 129 / 157...
- Page 58 Piazzetta Pellet Stove Guide to Setting Flue Parameters (Installer Information Only) This guide is supplementary to the Installation Instructions, which should be read before setting the flue fan parameters. It must only be carried out by an authorised installation engineer with the correct equipment. Whilst the appliance will normally operate as set in the factory, for optimum performance the flue gas fan must be adjusted to allow for variations in individual flues.
- Page 59 Pressure values must never be lower than 60 Pa (the limit of safety threshold). If higher pressures are set than recommended it can cause pellets to ‘float’ in the grate and not light. Parameter Pressure Settings The pressure settings are obtained from Robeys Limited 01773 820940 or contact info@robeys.co.uk You will need to have the Firmware version information.
- Page 62 Robeys Ltd Goods Road, Belper, Derbyshire. DE56 1UU Tel 01773 820940 Fax 01773599309 Email info@robeys.co.uk www.robeys.co.uk...
Need help?
Do you have a question about the Thermo P966 and is the answer not in the manual?
Questions and answers