Table of Contents
Advertisement
slowly or apps don't respond, you can reset your device and
restart it.
1.
Press and hold the reset button on the right side of your
device by using a small, pointed object, for example, a
paper clip.
2.
To restart the device, slide and hold the Power switch
on the right side of the device downwards for three
seconds.
NOTE
Your data won't be deleted and is still available
after resetting the VoiceTracer.
Can I connect a microphone to the VoiceTracer
DVT2110?
No, the DVT2110 doesn't have a microphone input.
Why does my computer not recognize the Voi-
ceTracer when it is connected via a USB?
Try one of the following:
• If you are using a USB hub, connect the VoiceTracer di-
rectly to a USB port on your computer without using a
hub.
• Reboot your computer.
• Connect the VoiceTracer to a different USB port on your
computer.
• Connect the VoiceTracer to a different computer.
• Restart your VoiceTracer.
Can I use my VoiceTracer as a mass storage
device?
Yes, you can use your VoiceTracer as a USB mass storage to
conveniently store, back up and move files.
Connect the device to a computer with a USB cable. Your
recorder will automatically be recognized as a mass storage
device. You don't need to install any software.
How can I delete recordings on my VoiceTrac-
er?
You can delete individual files from your device.
1.
In stop mode or playback mode, press the Right func-
tion button
to open the settings panel.
2.
Press the Up/Down buttons to navigate to Delete and
then press the Record button to confirm your selection.
Which recording formats are supported?
The VoiceTracer supports the following recording formats:
• MPEG1 layer 3 (MP3)
• PCM (WAV)
My VoiceTracer turns off automatically after
some time. How can I disable this?
This is a battery saving feature, which can be changed in the
settings menu of your VoiceTracer.
Go to All settings > Device settings > Auto off.
You can either change the time period for the device to
switch off automatically or turn this feature off entirely.
I no longer see any recordings
You may activated a filter in the playback settings. To
change this:
1.
In stop mode, press the File list button.
2.
Press the Left function button
panel.
3.
Press the Up/Down buttons to select All and then press
the Record button to confirm your selection.
to open the folder
16
Hide quick links:
Advertisement
Table of Contents
