Current Draw And Thermal Dissipation Specifications - Lab.gruppen FP+ Series FP 10000Q Operation Manual

8 APPENDIX
8.4

Current draw and Thermal dissipation specifications

The following tables contain information on measured current consumption as well as calculated heat dissipa-
tion during normal operation(1/8 rated power); and during extreme heavy duty operation (1/4 rated power).
Standby, with remote power off via NomadLink
Powered on, idling
Pink noise (1/8
rated power)
Pink noise (1/4
rated power)
*3)
Mains connector, 230 V CE version
Mains connector, 115 V ETL version
*1) The amplifi er's PSU operates as a non-resistive load, so the calculation "Volts x Amps = Watts" would not be correct. Instead, measured and
specifi ed here is what is known as the "Active Power" of the amplifi er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw fi gures measured at 230 V. 115 V fi gures are 230 V fi gures multiplied by two.
*3) Figures measured at maximum power before amplifi er protection and limiter features are engaged. Typically this is between 1/4 and 1/3 of rated
power. Note that the max. power condition is very extreme and will not occur during normal operation. Also note that the mains breaker will not be
tripped even if operation is in excess of max. ratings.
Standby, with remote power off via NomadLink
Powered on, idling
Pink noise (1/8
rated power)
Pink noise (1/4
rated power)
*3)
Mains connector, 230 V CE version
Mains connector, 115 V ETL version
*1) The amplifi er's PSU operates as a non-resistive load, so the calculation "Volts x Amps = Watts" would not be correct. Instead, measured and
specifi ed here is what is known as the "Active Power" of the amplifi er providing useful, real-world values of power consumption and heat dissipation.
*2) Current draw fi gures measured at 230 V. 115 V fi gures are 230 V fi gures multiplied by two.
*3) Figures measured at maximum power before amplifi er protection and limiter features are engaged. Typically this is between 1/4 and 1/3 of rated
power. Note that the max. power condition is very extreme and will not occur during normal operation. Also note that the mains breaker will not be
tripped even if operation is in excess of max. ratings.
28 FP+ Series Operation Manual
Level Load Rated Power
16 Ω / Ch.
1200 x 2
32 Ω / Bridged
2400 x 1
8 Ω / Ch.
2350 x 2
16 Ω / Bridged
4700 x 1
4 Ω / Ch. 4400 x 2
8 Ω / Bridged 8800 x 1
2 Ω / Ch. 6500 x 2
4 Ω / Bridged 13000 x 1
16 Ω / Ch. 1200 x 2
32 Ω / Bridged 2400 x 1
8 Ω / Ch.
2350 x 2
16 Ω / Bridged
4700 x 1
4 Ω / Ch.
4400 x 2
8 Ω / Bridged
8800 x 1
2 Ω / Ch. 6500 x 2
4 Ω / Bridged 13000 x 1
Level Load Rated Power
16 Ω / Ch.
730 x 2
32 Ω / Bridged
1460 x 1
8 Ω / Ch. 1450 x 2
16 Ω / Bridged 2900 x 1
4 Ω / Ch. 2800 x 2
8 Ω / Bridged 5600 x 1
2 Ω / Ch. 3500 x 2
4 Ω / Bridged 7000 x 1
16 Ω / Ch.
730 x 2
32 Ω / Bridged
1460 x 1
8 Ω / Ch.
1450 x 2
16 Ω / Bridged
2900 x 1
4 Ω / Ch. 2800 x 2
8 Ω / Bridged 5600 x 1
2 Ω / Ch. 3500 x 2
4 Ω / Bridged 7000 x 1
FP 13000
Line Current *2) Watt *1)
115 VAC 230 VAC In Out
0 0
129 0
Amp (I) Watt
10.6 5.3 678 300
16.2 8.1 1083 588
26.5 13.2 1856 1100
37.8 18.9 2536 1625
16.0 8.0 1037 800
27.2 13.6 1840 1567
48.3 24.1 3419 2933
58.0 29.0 4243 3250
16 A, CEE7
30 A, Nema L5-30P Twist lock
FP 7000
Line Current *2) Watt *1)
115 VAC 230 VAC In Out
0 0
92 0
Amp (I) Watt
6.8 3.4 411 183
10.8 5.4 692 363
17.4 8.7 1176 700
22.0 11.0 1518 875
19.6 9.8 800 487
33.3 16.6 1455 967
39.4 19.7 2705 1867
39.4 19.7 3088 2333
16 A, CEE7
30 A, Nema L5-30P Twist lock
Thermal dissipation
Dissipated BTU/hr kCal/hr
0 0 0
129 440 111
378 1289 325
495 1690 426
756 2578 650
911 3109 783
237 807 203
273 933 235
486 1659 418
993 3390 854
Thermal dissipation
Dissipated BTU/hr kCal/hr
0 0 0
92 316 80
229 781 197
329 1123 283
476 1625 409
643 2195 553
313 1070 270
489 1667 420
838 2860 721
754 2574 649