Adjusting The Brakes - helavo H1010 Series User Instructions

Adjusting the brakes

To adjust the rear brake ("L"), adjust the adjustment
screw and locking nut. These are located on the rear
wheels ("K") of the
adjustment screw counterclockwise to increase the
tension. Then secure the adjustment by turning the
locking nut clockwise. Hold the adjustment screw in
place while doing so.
Important

If the brake adjustment has been made so that the rear brake ("L") is set too loose or too tight, this will affect the function
of the brake. If the brake is set too tight, it could drag on the wheel. If the brake is set too loose, it could affect the
operation of the brake.
rollator. Turn the
Locking nut
Adjustment screw
User instructions | 13