000 Programmable Time Clock; 000 Programmable Time Clock - ELTEC 3000 Instruction Manual

1.2 TC - 3000 PROGRAMMAbLE TIME CLOCk
The TC - 3 000 is the field unit which locally controls a relay and
integral DC flasher as programmed through a user defined schedule.
The schedule includes a weekly program of up to six ON/OFF
operations per day, a holiday/no-school schedule of up to 20 holidays,
and exception days for irregular activities such as early dismissal, late
starts, and snow delays. The schedule is typically programmed for one
year, but may be programmed for longer periods provided the user
does not exceed 20 holidays or 365 exception days. Manual override
duration is programmable from one minute to ten hours.
The TC - 3 000 is typically programmed from the host computer
using the DLPRO 3000 software. It can also be programmed from its
associated LANG or directly at the clock using the keypad on the front
of the clock. Program elements are opened by typing the appropriate
access sequence and a key word for each entry is displayed to guide the
user through the programming process. Once the required information
is entered for each field, the display advances to the next field until all
data for that program element is entered. The TC - 3 000 provides 'type-
over', 'back up' and 'field skip' features during the entry process to
facilitate error correction, simplify navigation and make programming
quick and easy. Program schedules can be reviewed or edited at any
time without disturbing the operation of the clock.
The TC - 3 000 maintains time and date during power outages for a
minimum of seven days with its rechargeable capacitive backup system.
Program information is stored in non-volatile memory (NVRAM) and
is kept during power off conditions for the life of the clock. When
installed and communication with the host system is established, time
and date are updated by the host computer during system monitoring or
when the Sync command is used. When communications are down or
when operating in stand-alone mode, the real-time clock maintains time
and date information with a quartz crystal accuracy of two seconds per
month.
Although designed to integrate into the System 3000 for remote
programming and control, the TC - 3 000 can operate as a stand-alone
time-based controller.
Technical information, programming functions, and operating
parameters concerning the TC - 3 000 are provided in Section 7—
Appendix (pages 29–30).
Figure 1.2 describes the hardware features of the TC - 3 000
programmable time clock.
1 W ATT 900 M hz RADIO
2 – L INE LCD
16 – K EY KEYPAD
SYSTEM DECAL
CIRCULAR PIN CONNECTOR
2
FRI 05-17-13
11:32:02
1 2 3 A
4 5 6 B
7 8 9 C
*
0 # D
TC-3000 Programming Prompts
A ATTENTION
b ENTER
800-227-1734
903-938-1901 C CANCEL
11 Set Time 87 View / Edit 7-Day Schedule
21 Set Date 90 Factory Reset
31 Manual Flash ON 91 Daylight Saing Time
32 Manual Flash OFF 98 Restart Unit
33 Clear Oerride 99 Firmware Version
36 Set Oerride Duration 02 Display Transmit Power
54 Get Radio Address (MAC ID) 04 Set Transmit Power Ma
57 View / Edit LANG Radio Address 12 Display / Adust Clock Cal byte
65 Clear Holidays 14 Auto Config Radio Transceier
67 View / Edit Holidays 18 View Flasher Status
75 Clear Eceptions
77 View / Edit Eceptions A key: backup
78 New Eception D key: Moe Forward / Skip Fields
Electrotechnics Corporation www.ELTECCORP.com
1310 Commerce St. Tech Support:
Marshall, TX 75672 U.S.A companyELTECCORP.com
Figure 1.2
• No FCC License Required
• Selective Addressing
• Inherent Privacy / S ecurity
• Interference Rejection
• Date, Time, and Status
• View / E dit Programs
• View / E dit System Parameters
• Local Programming
Testing, and Override
• [A] Attention Functions
• [*] Star Functions
• Program Function Reference
• System Function Reference
• Technical Support Number
• Power, Control, and Monitoring
• Distinct AC or DC Power Wiring
• Simple Installation or Replacement