Removing The Air Inlets; Fig. 28: Removing The Filter Silencer - ABB HT596239 Operation Manual

Operation Manual / 4 Product description / A100-M axial
8 Disassembly and assembly / 8.3 Removing the air inlets
8.3

Removing the air inlets

8.3.1 Removing the filter silencer
Dismantle insulation as far as necessary.
u
Fig. 28: Removing the filter silencer
1. Loop lifting gear through the fin on the filter silencer and secure to the eyelets at the rear
with shackles (90195).
2. Loosen nuts (72027) and remove with washers (72028).
Remove and put down filter silencer.
u
8.3.2 Removing the air suction branch
Disconnect all air lines according to the instructions of the enginebuilder.
u
Dismantle insulation as far as necessary.
u
© Copyright 2020 ABB. All rights reserved. HZTL4033_EN Rev.E May 2020