Cabinet Door; Before Installing The Appliance - Miele FNS 37492 iE Operating And Installation Instructions

Installation

Cabinet door

An cabinet door is required.
The cabinet door must be at least
5/8" (16 mm) / 3/4" (19 mm) thick.
– Weight of the door panel

If the door panel is too heavy
damage can occur.
Installing a door panel which is heav-
ier than the maximum permitted
weight could damage the hinges.
This can cause subsequent func-
tional problems.
Before installing the door panel, en-
sure that the weight of the door
panel does not exceed the maximum
permitted weight.
Before installing the cabinet door, en-
sure that the weight of the door does
not exceed the maximum permitted
weight.
Appliance
FNS 37492 iE
64
Maximum weight
of cabinet door in
lbs (kg)
57 (26)

Before installing the appliance

 Before installation, remove the bag of
installation and other accessories
from the appliance and remove the
profile strip from the outer appliance
door.
 Do not remove the following from
the back of the appliance
- the spacers (depending on the
model). They ensure the distance re-
quired between the back of the appli-
ance and the wall.
- the bags located in the metal grille
(heat exchanger, depending on
model).
These are required for the functioning
of the appliance. Their contents are
not toxic or hazardous.
 Remove the cable clips from the back
of the appliance.