Host Event Tasks; Sources - Siemens SiPass integrated Reference Manual

Host event tasks

7

Sources

7 Host event tasks
7.1 Sources
28 | 66
SiPass integrated allows you to define a host event task that performs a certain
task (command) when a specific set of circumstances have been met (trigger). The
following tables list the sources that can be used to trigger a host event task, along
with a brief description of that source and the commands that can be implemented
when the source has been triggered.
Source State (trigger)
ACC Control Activated
Access Point "Daily Code" mode
set
"No Additional
Access" mode set
"No Dual Custody"
mode set
"PIN as Card" mode
set
"Standard Dual
Custody" mode set
"Supervisory Dual
Custody" mode set
Access denied- Hard
Perimeter Violation
Access Denied-
Intrusion Area Armed
Accessibility Valid
Card Presented
Card Expired
Card not yet active
Card out of range
Card valid
Door Interlocking in
Progress Collision
Intrusion Control
Disabled
Description
This allows to you create a Host event task
which can be triggered by a Hardware event, like
a Controller Event Task.
If you create an ACC Control Host event task, it
will be avail-able to select as a Command in the
Controller Event Task dia-log.
Access Point mode set to Daily Code.
Access Point mode set to No Additional Access.
Access Point mode set to No Dual Custody
mode.
Access Point mode set to Daily Code.
Access Point mode set to Daily Code.
Access Point mode set to Daily Code.
A cardholder has been denied entry due to hard
Anti-Passback area restrictions.
A host event task is triggered when a card is
presented at a reader is denied entry because
the area to which that reader belongs is currently
armed.
A valid card with the accessibility option has
been presented at a reader.
A host event task is triggered when an expired
card is pre-sented at a reader.
A host event task is triggered when a card that
has not yet reached its programmed "Start Date"
is presented at a reader.
A host event task is triggered when a card, with
a number out of the range supported by the
controller, is badged at a reader
A host event task is generated when a valid card
is badged at a reader.
A conflict in the operation of a door interlocking
set has occurred.
Intrusion Control has been disabled at the
access point.
A6V11144326