Kalmar DRF420-60S5 Maintenance Manual page 210

62
page –
a
b
Operating menu dynamic scale
a. Measured weight of load
b. load-centre measured from drive axle's centre
c. use of load capacity at load-centre in question
page –
1 2 3
4 5
CALIBRATION
SCALE STEERING
DRIVE-TRAIN RETURN
CALIBR SCALE
MINIMUM BOOM ANGLE
CALIBR VALUE
PRESENT VALUE
UDRF01.04GB
7 Load handling – 7.10.2 Weight indicator
Weight indicator, checking (product alternative
dynamic scale)
1 Lift a known weight.
2 Check that the weight indicator shows the correct weight ±0.5
c
ton. If the deviation is greater, calibrate the weight indicator.
Dynamic scale, calibration
NOTE
It is very important for accuracy that all steps are performed in
the specified order.
1 Park the machine on level ground without load and centre the
attachment.
2 Navigate to the service menu and press ENTER.
3 Enter code for calibration.
Code is obtained from Kalmar Industries Support.
NOTE
4 Scroll to SCALE with the arrow keys (1 and 2) and press ENTER.
Every calibration consists of a sequence of menus. Scroll be-
tween menus with the arrow keys.
5 Lower the boom to the lowest position (0°).
6 CALIBR SCALE, menu 1 and save the setting with ENTER.
1(7)
7 Lift the boom to its highest angle.
X.XXV
X.XXV
Maintenance manual DRF 400–450
https://www.forkliftpdfmanuals.com/
The code determines which service menu is activated (Di-
agnostic test, Initiation or Calibration).