Do you have a question about the BiCore C R-Li and is the answer not in the manual?
Questions and answers
Sharon Lougheed
March 22, 2025
My right hearing aid is not working. It is 100% fully charged, and I have cleaned and replaced the tulip and post end. It no longer gives the 'jingle' when I insert it. The left hearing aid functions just fine.
1 comments:
Mr. Anderson
March 22, 2025
Possible issues with the right Rexton BiCore C R-Li hearing aid that is not working despite being fully charged and cleaned include:
1. Power-on-delay is active – Wait several seconds and check again. 2. Incorrect insertion – Reinsert the receiver until it fits securely. 3. Wax or dome obstruction – Clean or exchange the dome or wax protector. 4. Device malfunction – If the issue persists, consult a Hearing Care Professional.
Page 2
First Fit Process TeleCare Activation First Fit TeleCare may be activated at any time. The member doesn’t have to be present. 1. Click Login 1. Click on Programmer Selection 2. Select Noahlink Wireless 3. Remove hearing aids from charger • Wait 6 seconds for hearing aids to power 2.
Soundpro 2.0 Basic Tuning Customizing Soundpro 2.0 Basic Tuning Soundpro Mode Use the Basic Tuning tab to make adjustments for gain, loudness and comfort The default setting, Balanced Focus, should issues after First Fit. be maintained during First Fit. If changes are required during follow up visits, proceed as follows: 1.
Fine Tuning - Amplification Settings Fine Tuning - Noise Reduction / Microphone Fine Tuning Noise Reduction Fine Tuning is divided in multiple tabs to make Noise reduction is primarily controlled by Soundpro 2 detailed adjustments to most features of the hearing aids.
Page 5
Intelligent Feedback Preventer Loading Demo & Previous Settings Feedback Reduction Strategies Loading Previous or Demo Settings into Both Hearing Aids of a Binaural If feedback conditions exist there are several ways to make adjustments. Fitting 1. Open the desired Noah session Strategy 1 Connexx will open in simulation mode 2.
Rexton App Remote Services The Rexton app allows you to visit your Costco dispenser for hearing aid adjustments from anywhere after your initial fitting - without Download the Rexton App to your iPhone or Android smart phone before your fitting.
Need help?
Do you have a question about the BiCore C R-Li and is the answer not in the manual?
Questions and answers
My right hearing aid is not working. It is 100% fully charged, and I have cleaned and replaced the tulip and post end. It no longer gives the 'jingle' when I insert it. The left hearing aid functions just fine.
Possible issues with the right Rexton BiCore C R-Li hearing aid that is not working despite being fully charged and cleaned include:
1. Power-on-delay is active – Wait several seconds and check again.
2. Incorrect insertion – Reinsert the receiver until it fits securely.
3. Wax or dome obstruction – Clean or exchange the dome or wax protector.
4. Device malfunction – If the issue persists, consult a Hearing Care Professional.
This answer is automatically generated