Pushpak ETR1000 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Changing the world one Vehicle at a Time

OWNER'S MANUAL

ETR1000 | ETR2000 | ETR3000 | ETR4000 | ETR5000,

ETR6000,ETR7000

3rd Edition, 2021

IMPORTANT:

This manual contains important safety, performance, and service information. Please read it before taking the

first ride of your Pushpak.

NOTE:

This manual is not intended as a comprehensive use, service, repair, or maintenance manual. Please seek

assistance from a qualified technician for service, repairs, or maintenance.

1-900-888-888, support@pushpak.com, pushpakmotors.net

Table of Contents

Need help?

Do you have a question about the ETR1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Pushpak ETR1000

Page 1 Changing the world one Vehicle at a Time OWNER'S MANUAL ETR1000 | ETR2000 | ETR3000 | ETR4000 | ETR5000, ETR6000,ETR7000 3rd Edition, 2021 IMPORTANT: This manual contains important safety, performance, and service information. Please read it before taking the first ride of your Pushpak.
Page 2: Introduction
Your Pushpak's serial number is stamped on the front of the steering column or adhered underneath the VIN cap in the front interior panel. Please record it below if your Pushpak is lost or stolen. You may also want to register your serial number with your local police department.
Page 3: Table Of Contents
CONTENTS INTRODUCTION GENERAL WARNING GENERAL OVERVIEW OVERVIEW – STEERING/CONTROLS ROUTINE INSPECTION BEFORE RIDING OPERATING YOUR PUSHPAK CHARGING YOUR PUSHPAK/BATTERY INFORMATION PREVENTATIVE MAINTENANCE GENERAL MAINTENANCE FRONT BRAKE INSPECTION AND ADJUSTMENT REAR BRAKE INSPECTION AND ADJUSTMENT SHOCK ABSORBERS TIRES AND WHEELS REAR AXLE...
Page 4 Changing the world one Vehicle at a Time SHOCK ABSORBERS TIRES AND WHEELS BATTERY STORAGE OF YOUR PUSHPAK/CHARGER...
Page 5: General Warning
GENERAL WARNING Riding a Pushpak involves the risk of injury and damage. By choosing to ride a Pushpak, you assume the responsibility for that risk, so it is essential to know and practice safe and responsible riding rules of proper use and maintenance.
Page 6 Changing the world one Vehicle at a Time FEATURES & SPECIFICATIONS ETR1000 ETR2000 DIMENSIONS 5 x 2.4 x 3.6 Feet DIMENSIONS 5.11 × 2.6 × 3.2 Feet WEIGHT 200 Pounds WEIGHT 200 Pounds MOTOR 650W DC Brushless MOTOR 650W Brushless...
Page 7 Changing the world one Vehicle at a Time ETR3000 ETR4000 DIMENSIONS 6.1 x 2.4 x 3.6 Feet DIMENSIONS 7 x 3 x 3.7 Feet WEIGHT 240 Pounds WEIGHT 265 Pounds MOTOR 650W DC Brushless MOTOR 650W DC Brushless DRIVING METHOD Rear Differential DRIVING METHOD Rear Differential FRAME 6061 Aluminum Alloy FRAME 6061 Aluminum Alloy...
Page 8 Changing the world one Vehicle at a Time ETR5000 ETR6000 DIMENSIONS 7 x 3 x 3.7 Feet DIMENSIONS 7 x 3.3 x 5.4 Feet WEIGHT 265 Pounds WEIGHT 570 Pounds MOTOR 650W DC Brushless MOTOR 1000W DC Brushless DRIVING METHOD Rear Differential DRIVING METHOD Rear Differential FRAME 6061 Aluminum Alloy FRAME 6061 Aluminum Alloy...
Page 9: General Overview
Backrest 13. Charging Outlet 7. Storage Compartment 14. Armrests Cupholder (optional) NOTE: This is a general depiction of a Pushpak. Parts above may differ from model to model in location, design, and availability. Please contact Pushpak Motors with any questions.
Page 10: Overview - Steering/Controls
Throttle Controller Brake Fluid Reservoir Right Hand Brake 14. Parking Brake NOTE: This is a general depiction of controls. Controls above may differ from model to model in location, availability, and variation of setting. Please contact Pushpak Motors with any questions.
Page 11: Routine Inspection Before Riding
Pushpak. Battery - Check the battery life indicator and charge, if needed. Your Pushpak can travel a max range of 50 miles on a full charge. To maximize use per trip, it is recommended you do not allow the battery capacity to decrease to less than 20%.
Page 12 Changing the world one Vehicle at a Time 10. Storage compartments – Check that the latches and keys on all storage compartments are secure. If applicable, make sure the rear seat is securely in the fully converted position.
Page 13: Operating Your Pushpak
1. IGNITION SWITCH a. ON – To engage the electric motor and enable the Pushpak to be driven, insert the key into the ignition and turn to the right or ON position. The key cannot be removed while it is in the ON position.
Page 14 Setting 1 and Setting 3. a. Setting 1 – Pushpak is limited to a maximum speed of 6 MPH. It is recommended that you use this setting when moving at a slow speed is safer or ideal for the driving conditions, e.g., driving up or down inclines.
Page 15 In the United States, bicyclists are required to use hand signals to alert surrounding traffic of their intention to turn or change lanes. Your Pushpak is equipped with left and right turn signals which may be used in place of hand signals for this purpose. If you opt not to use the turn signals, you must instead use proper hand signals.
Page 16 When your Pushpak is not in use, engage the parking brake to ensure no movement. a. Once the Pushpak is brought to a full stop, turn the key in the OFF position's ignition. b. Engage the parking brake to ensure the brakes are locked: a.
Page 17 XII. USB Charging Port The USB charging port can be found beneath the universal phone holder. If an adaptor is provided to connect the USB charging port to the main Pushpak charging outlet, dependingg on your Pushpak model. XIII. ETR500HT Exclusive Features The following features come standard only on the ETR500HT model.
Page 18 Changing the world one Vehicle at a Time IV. Key Fob Controls The ETR100 comes equipped with a key fob controller that allows you to engage the alarm system or briefly sound the alarm. NOTE: The alarm system does not lock the wheels, but simply emits a series of loud beeps to alert you.
Page 19: Charging Your Pushpak/Battery Information
CHARGING YOUR PUSHPAK/BATTERY INFORMATION Your Pushpak comes with a battery charger. DO NOT use other chargers to charge your Pushpak. Use the battery life indicator on the Pushpak instrument display to gauge the battery life. To maximize use per trip, do not allow the battery life to decrease to less than 20%.
Page 20 BATTERY INFORMATION & SAFEGUARD The lithium ion battery that comes with your Pushpak can last over 1000 charges or 2 to 3 years with average use and proper care. Do not use the battery for any other purpose than to power your Pushpak.
Page 21 Turn the battery switch in the battery compartment to the OFF position. NOTE: Some Pushpak models do not have a battery switch. In this case, go to step d. through h. below, skip step I., and continue with remaining steps.
Page 22: Preventative Maintenance
Inspect all electrical components to make sure they are functioning properly. g. Make sure all fasteners and screws are tightly secured throughout the Pushpak body. h. Keep your Pushpak vehicle clean as a buildup of dirt and other substances can impair proper functioning.
Page 23: Rear Brake Inspection And Adjustment
It is essential that the rear brake system that is engaged by squeezing the left brake handle, be properly adjusted to allow for adequate clearance while the Pushpak is traveling, but still allow for effective braking. This system is either drum or disc brakes depending on your Pushpak model. Follow the appropriate inspection and adjustments applicable to your Pushpak's rear braking system.
Page 24 3mm or 3.5mm, it must be replaced in pairs. The disc brake thickness and wear limits may differ slightly from Pushpak model to model. d. If the left brake handle is spongy or has little resistance or effectiveness when squeezed, exhaust the left brake system as follows: i.
Page 25: Shock Absorbers
Inspect the tires for proper inflation. This inspection should always be performed while the tires are "cold" before driving the vehicle. Recommended tire pressure varies on each model: ETR1000 - 43 PSI ETR2000/ETR3000 - 36 PSI ETR4000 - Front 44-55 PSI, Rear 36 PSI ETR500HT - 36 PSI c.
Page 26: Storage Of Your Pushpak/Charger
Battery - Check the battery life indicator and charge, if needed. Your Pushpak can travel a max range of 50 miles on a full charge. To maximize use per trip, it is recommended you do not allow the battery capacity to decrease to less than 20%.
Page 27 Changing the world one Vehicle at a Time Horn – Make sure the horn sounds when pushed. Parking brake – Make sure the parking brake effectively locks and releases the rear brakes. k. Mirrors – Make sure both mirrors are correctly adjusted for peripheral viewing on either side. Steering control/alignment –Ensure the steering column is stable and aligned and turns appropriately to the left and right.
Page 28: Operating Your Pushpak
IGNITION SWITCH a. ON – To engage the electric motor and enable the Pushpak to be driven, insert the key into the ignition and turn to the right or ON position. The key cannot be removed while it is in the ON position.
Page 29: Speed Setting Switch - 3 Settings
In the United States, bicyclists are required to use hand signals to alert surrounding traffic of their intention to turn or change lanes. Your Pushpak is equipped with left and right turn signals which may be used in place of hand signals for this purpose. If you opt not to use the turn signals, you must instead use proper hand signals.
Page 30: Slowing Down/Braking
If the rear braking lights are not functional, you should have the Pushpak serviced immediately for repair. The proper hand signal must be used if riding the Pushpak without rear braking lights.
Page 31: Parking/Parking Brake
When your Pushpak is not in use, engage the parking brake to ensure no movement. a. Once the Pushpak is brought to a full stop, turn the key in the OFF position's ignition. b. Engage the parking brake to ensure the brakes are locked: a.
Page 32: Usb Charging Port
To clean the windshield, push the windshield wiper button to turn wiper on/off. EE. KEY FOB CONTROLS The ETR1000 comes equipped with a key fob controller that allows you to engage the alarm system or briefly sound the alarm. NOTE: The alarm system does not lock the wheels, but simply emits a series of loud beeps to...
Page 33: Charging Your Pushpak/Battery Information
CHARGING YOUR PUSHPAK/BATTERY INFORMATION Your Pushpak comes with a battery charger. DO NOT use other chargers to charge your Pushpak. Use the battery life indicator on the Pushpak instrument display to gauge the battery life. To maximize use per trip, do not allow the battery life to decrease to less than 20%.
Page 34 BATTERY INFORMATION & SAFEGUARD The lithium ion battery that comes with your Pushpak can last over 1000 charges or 2 to 3 years with average use and proper care. Do not use the battery for any other purpose than to power your Pushpak.
Page 35 Turn the battery switch in the battery compartment to the OFF position. NOTE: Some Pushpak models do not have a battery switch. In this case, go to step d. through h. below, skip step I., and continue with remaining steps.
Page 36 Changing the world one Vehicle at a Time g. Make sure battery is securely fastened in place. h. Securely plug the battery cable into the battery. Turn the battery switch to the ON position. Insert the key and turn the ignition to the ON position to view the battery life indicator. If the battery requires charging, plug in the charger until the battery is fully charged.
Page 37: Preventative Maintenance
Inspect all electrical components to make sure they are functioning properly. g. Make sure all fasteners and screws are tightly secured throughout the Pushpak body. h. Keep your Pushpak vehicle clean as a buildup of dirt and other substances can impair proper functioning.
Page 38: Rear Brake Inspection And Adjustment
It is essential that the rear brake system that is engaged by squeezing the left brake handle, be properly adjusted to allow for adequate clearance while the Pushpak is traveling, but still allow for effective braking. This system is either drum or disc brakes depending on your Pushpak model. Follow the appropriate inspection and adjustments applicable to your Pushpak's rear braking system.
Page 39 3mm or 3.5mm, it must be replaced in pairs. The disc brake thickness and wear limits may differ slightly from Pushpak model to model. 4. If the left brake handle is spongy or has little resistance or effectiveness when squeezed, exhaust the left brake system as follows: i.
Page 40 Inspect the tires for proper inflation. This inspection should always be performed while the tires are "cold" before driving the vehicle. Recommended tire pressure varies on each model: ETR1000 - 43 PSI ETR2000/ETR3000 - 36 PSI ETR400 - Front 44-55 PSI, Rear 36 PSI ETR500HT - 36 PSI c.
Page 41 Pushpak. b. When storing your Pushpak for an extended period, charge the battery at least once per month. The recommended storage temperature is 60 degrees Fahrenheit and at 40% battery capacity.

This manual is also suitable for:

Etr2000 Etr3000 Etr4000 Etr5000 Etr6000 Etr7000