Table of Contents
Advertisement
Quick Links
Quick Start
Getting to Know the SP-SW1900-HD (SW1900-HD)
Getting to Know the SP-SW1900-HD (SW1900-HD)
The graphic below points out key attributes of the SW1900-HD.
Power and Power
Indicator
USB Firmware Update
Connect Sources Devices Here
Front View
Front View
Stereo Audio Output
Back View
Back View
Communication Port
Display Output
Stereo Output
Stereo Input Port
Connections
Connections
Inputs and Outputs. Using the graphic above, connect the source devices to the ports labeled
"Connect Source Devices Here", and the display at location, "Display Output".
Stereo Audio Input. Connect the 3.5mm stereo jack from an iPhone/iPad or wireless
microphone system (line level) to the SW1900-HD. The audio from this connector is
automatically mixed and sent to the HDMI device and stereo output. Trim, gain, and mix
adjustments are available through the RS-232 interface.
Stereo Audio Output. If external speakers are required, connect the RCA jacks from the
SW1900-HD to your amplifier or powered speakers. Audio on the RCA jacks are always active.
Volume and mix levels are available through the RS-232 interface.
SP-SW1900-HD Quick Start Guide
Page 1
Advertisement
Table of Contents
Related Manuals for SP Controls SP-SW1900-HD
Summary of Contents for SP Controls SP-SW1900-HD
- Page 1 Quick Start Getting to Know the SP-SW1900-HD (SW1900-HD) Getting to Know the SP-SW1900-HD (SW1900-HD) The graphic below points out key attributes of the SW1900-HD. Power and Power Indicator USB Firmware Update Connect Sources Devices Here Front View Front View Stereo Audio Output...
- Page 2 SW1900-HD will wait 30 seconds of inactivity then turn off the display. In many cases, this feature eliminates the need for remotes, extends display life, and saves on power. This feature also simplifies conference rooms and huddle spaces making them more usable. Page 2 SP Controls, Inc.
Need help?
Do you have a question about the SP-SW1900-HD and is the answer not in the manual?
Questions and answers